GUARD AS 7T6242 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     8C-8422     Sealant     1    
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01156405
Apply Tooling (A) to the joint face of inlet manifold (2). Inlet manifold (2) must be installed within ten minutes. Position inlet manifold (2) on the cylinder block. Install the support assembly for the air inlet heater solenoid and bolts (1) .
Install the air inlet heaters, if necessary.
Apply Tooling (A) to the joint face of air inlet elbow (3). Air inlet elbow (3) must be installed within 10 minutes. Position air inlet elbow (3) on inlet manifold (2) and install bolts (6) .
Connect harness assembly (5) to inlet manifold (2) .
Connect harness assembly (4) to air inlet elbow (3) .