GUARD GP-PRECLEANER 8G4464 - Caterpillar

Illustration 1 g01255765
Typical exampleUse the following procedure in order to tighten the bolts for the support assemblies:
Install four bolts (2) loosely through the support assembly (1) onto the front of the engine.
Install bolts (5) and bolts (6) loosely in order to assemble the support assembly (3) for the alternator onto the support assembly (1) .
Assemble the support assembly (3) for the alternator onto the housing for the water pump and the regulator housing with bolts (8) and screws (4) .
Tighten the front four primary mounting bolts (2) to standard torque.
Tighten bolts (5) and bolts (6) to standard torque.
Tighten bolts (8) to the water pump housing to standard torque.
Tighten screws (4) to 15 3 N m (11 2 lb ft).Note: All of the bushings (7) must seat firmly on the housings.