GUARD AS-LH 9W3212 - Caterpillar

Removal procedure
Note: Put identification marks on all harness assemblies for installation purposes.
Position the arm assembly to the Forward position.
Illustration 1 g02358688
Remove screws (1). Repeat for the opposite side. Remove screws (2).
Illustration 2 g02357176
Sudden release of spring force can cause injury.To prevent the possibility of injury, follow the procedure to relieve the spring pressure.
Remove cover assemblies (3).Note: The inner cover can be positioned on the floor without disconnecting the arm rest latch cable. Be sure that the arm rest is latched properly.
Illustration 3 g02357296
Disconnect harness assembly (6). Remove screws (5) and electrohydraulic steering control (4).Installation Procedure
Install electrohydraulic steering control (4) in the reverse order of the removal.
Torque for screws (1) and (5) is 6 1 N m (53 9 lb in).
Torque for screws (2) and (5) is 1.7 0.4 N m (15 4 lb in).