GUARDRAIL AS 4511055 - Caterpillar

Illustration 1 g01614593
Improper lifting and improper tie-downs can allow the load to shift and cause injury or damage.
Note: The shipping weight that is listed is the weight of the most common configuration of the machine. If attachments have been installed on your machine, the weight of your machine and the center of gravity of your machine may vary.Refer to the Operation and Maintenance, "Specifications" for specific weight information.
Use proper rated cables and slings for lifting. The crane should be positioned so that the machine is lifted parallel to the ground.
Illustration 2 g06045162
Rear eyes and front eyes lifting locations
Use the rear eyes and the front eyes that are provided on the upper frame to lift the machine.
To prevent contact with the machine, lifting cables should have sufficient length.
Use the rear eyes and the front eyes that are provided on the lower frame to fasten tie-downs. Use corner protectors for sharp corners.
Move the hydraulic lockout control to the LOCKED position.Lifting the Machine Segments
Bucket
Illustration 3 g01587173
(1) Sleeve
(2) Bolts
(3) Pin
(4) NutsInstall pin (3) and install sleeve (1) in the brackets of the bucket. The previous illustration indicates the method to secure pin (3) with bolts (2) and nuts (4). Fasten two proper rated wire cables to pin (3).Note: Never use the step when the machine is lifted up.