1K1531 GUIDE-RH Caterpillar parts
Rating:
Alternative (cross code) number:
CA1K1531
1K-1531
1K1531
CA1K1531
1K-1531
1K1531
Information:
Operation (6)This warning label is located on the right hand bracket of the ROPS inside the cab.
g00977514
DO NOT OPERATE OR WORK ON THIS MACHINE UNLESS YOU HAVE READ AND UNDERSTAND THE INSTRUCTIONS AND S IN THE OPERATION AND MAINTENANCE MANUALS. FAILURE TO FOLLOW THE INSTRUCTIONS OR HEED THE S COULD RESULT IN INJURY OR DEATH. CONTACT ANY CATERPILLAR DEALER FOR REPLACEMENT MANUALS. PROPER CARE IS YOUR RESPONSIBILITY.
Do Not Weld on the ROPS (7)This warning label is located on the left hand side of the cab.
g00917819
Personal injury or death can result when voiding this certification.Structural damage, an overturn, modification, alteration, or improper repair can impair the ROPS structure's protection capability thereby voiding this certification.Do not weld on or drill holes in the structure.To avoid possible weakening of this ROPS, consult a Caterpillar dealer before altering this ROPS in any way. The protection offered by this ROPS will be impaired if it has been subjected to structural damage.Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
"Rollover (ROPS) and Falling Object (FOPS) Protective Structure Certification ""This structure, when properly installed on a machine which is not altered to exceed the certification test mass meets, at the time of installation, criteria established by: SAE J394, SAE J1040 MAY94, ISO 3471:1994, SAEJ/ISO 3449 APR98 LEVELII, ISO 3449:1992 LEVEL II."Clearance With the Fan (8)This warning label is located above the support plates of the radiator.
g00917837
Keep hands clear of fan while engine is running. May cause serious injury or death.
Deactivation of the Product Link System (9)This warning label is located in the cab.
g00977528
This machine is equipped with a Caterpillar Product Link radio communication device which must be deactivated within 6.0 m (20 ft) of a blast zone. Failure to do so could result in serious injury or death.
Battery (10)This warning label is located on the top of each battery.
g00103695
DANGER/POISONShield eyes, Explosive gases. Can cause blindness or injury.No sparks, flames or smoking.Sulfuric Acid can cause blindness or severe burns.FLUSH EYES IMMEDIATELY WITH WATER. Get medical help fast.Keep out of reach of children. Contains sulfuric acid. For medical emergency in USA or Canada contact: 800-458-5924, other countries contact:, 303-893-1322.
Hydraulic Pressure (11)This warning label is located on the hydraulic tank.
g00977535
Hydraulic oil pressure can remain in the hydraulic system on this machine after the engine and pump have been stopped. Serious injury can result if this pressure is not released before any service is done on the hydraulic systems. In order to prevent possible injury, release the hydraulic system pressure before working on any fitting, hose, or hydraulic component.Lower all attachments to the ground before service is started. If the hydraulic system must be serviced, tested, or adjusted with the attachment in the raised position, the attachments and lift cylinders must be supported properly.Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when the engine is running and tests or adjustments are being made.
g00977514
DO NOT OPERATE OR WORK ON THIS MACHINE UNLESS YOU HAVE READ AND UNDERSTAND THE INSTRUCTIONS AND S IN THE OPERATION AND MAINTENANCE MANUALS. FAILURE TO FOLLOW THE INSTRUCTIONS OR HEED THE S COULD RESULT IN INJURY OR DEATH. CONTACT ANY CATERPILLAR DEALER FOR REPLACEMENT MANUALS. PROPER CARE IS YOUR RESPONSIBILITY.
Do Not Weld on the ROPS (7)This warning label is located on the left hand side of the cab.
g00917819
Personal injury or death can result when voiding this certification.Structural damage, an overturn, modification, alteration, or improper repair can impair the ROPS structure's protection capability thereby voiding this certification.Do not weld on or drill holes in the structure.To avoid possible weakening of this ROPS, consult a Caterpillar dealer before altering this ROPS in any way. The protection offered by this ROPS will be impaired if it has been subjected to structural damage.Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
"Rollover (ROPS) and Falling Object (FOPS) Protective Structure Certification ""This structure, when properly installed on a machine which is not altered to exceed the certification test mass meets, at the time of installation, criteria established by: SAE J394, SAE J1040 MAY94, ISO 3471:1994, SAEJ/ISO 3449 APR98 LEVELII, ISO 3449:1992 LEVEL II."Clearance With the Fan (8)This warning label is located above the support plates of the radiator.
g00917837
Keep hands clear of fan while engine is running. May cause serious injury or death.
Deactivation of the Product Link System (9)This warning label is located in the cab.
g00977528
This machine is equipped with a Caterpillar Product Link radio communication device which must be deactivated within 6.0 m (20 ft) of a blast zone. Failure to do so could result in serious injury or death.
Battery (10)This warning label is located on the top of each battery.
g00103695
DANGER/POISONShield eyes, Explosive gases. Can cause blindness or injury.No sparks, flames or smoking.Sulfuric Acid can cause blindness or severe burns.FLUSH EYES IMMEDIATELY WITH WATER. Get medical help fast.Keep out of reach of children. Contains sulfuric acid. For medical emergency in USA or Canada contact: 800-458-5924, other countries contact:, 303-893-1322.
Hydraulic Pressure (11)This warning label is located on the hydraulic tank.
g00977535
Hydraulic oil pressure can remain in the hydraulic system on this machine after the engine and pump have been stopped. Serious injury can result if this pressure is not released before any service is done on the hydraulic systems. In order to prevent possible injury, release the hydraulic system pressure before working on any fitting, hose, or hydraulic component.Lower all attachments to the ground before service is started. If the hydraulic system must be serviced, tested, or adjusted with the attachment in the raised position, the attachments and lift cylinders must be supported properly.Always move the machine to a location away from the travel of other machines. Be sure that other personnel are not near the machine when the engine is running and tests or adjustments are being made.
Parts guide Caterpillar catalog:
1K1239
GUIDE
Caterpillar
Caterpillar
1K0849
GUIDE
Caterpillar
Caterpillar
1K0747
GUIDE-LH
Caterpillar
Caterpillar
1K0746
GUIDE-RH
Caterpillar
Caterpillar
1K0711
GUIDE
Caterpillar
Caterpillar
1K0539
GUIDE
Caterpillar
Caterpillar
1K1532
GUIDE-LH
Caterpillar
Caterpillar
1K1757
GUIDE
Caterpillar
Caterpillar
1K1779
GUIDE
Caterpillar
Caterpillar
1K1780
GUIDE
Caterpillar
Caterpillar
1K2052
GUIDE-RH
Caterpillar
Caterpillar
1K2053
GUIDE-LH
Caterpillar
Caterpillar