5304214 GUIDE-MAST Caterpillar parts
Rating:
Alternative (cross code) number:
CA5304214
530-4214
5304214
CA5304214
530-4214
5304214
Weight: 3 pounds 1 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
FOCUSFILTER FF63009 FF63054NN OEM Grade Fuel Filter, fits Cummins B & L Series Diesel Engines, Replaces 5303743, FF63008, FH22168, BF63000, 5289121, 5304214, P553009, WF10564, 63009 (Pack of 6)
FOCUSFILTER [Vehicle Fitment-1]: BLUE BIRD-ALL AMERICAN FE（08-20); Ford F650, F750 (w/Cummins ISB6.7L eng.)(14-15); Freightliner-(Chassis) S2C chassis (w/Cummins ISB6.7 eng.)(13-19); IC Bus-HC Series Bus (w/Cummins ISB 5.9L Eng.)(16-19) || [Vehicle Fitment-2]: INTERNATIONAL 4400 Durastar (w/Cummins ISL8.9 eng.)(17-19); T300 (w/Paccar PX9 eng.)(16-19); DOOSAN G70-Power Generation || [OE/OEM Part Number]: 5303743, 5289121, 5304214, 46587383, 46645085, 2391354 || [Reference Number]: FF63054NN, BF63000 || [Note]: If you're not sure about the part number you need. To better assist you in finding the correct part, please provide Car Year, Car Make, Car Model, Car Last 8 digits of (VIN)OR (ESN) ENGINE SERIAL NUMBER.
FOCUSFILTER [Vehicle Fitment-1]: BLUE BIRD-ALL AMERICAN FE（08-20); Ford F650, F750 (w/Cummins ISB6.7L eng.)(14-15); Freightliner-(Chassis) S2C chassis (w/Cummins ISB6.7 eng.)(13-19); IC Bus-HC Series Bus (w/Cummins ISB 5.9L Eng.)(16-19) || [Vehicle Fitment-2]: INTERNATIONAL 4400 Durastar (w/Cummins ISL8.9 eng.)(17-19); T300 (w/Paccar PX9 eng.)(16-19); DOOSAN G70-Power Generation || [OE/OEM Part Number]: 5303743, 5289121, 5304214, 46587383, 46645085, 2391354 || [Reference Number]: FF63054NN, BF63000 || [Note]: If you're not sure about the part number you need. To better assist you in finding the correct part, please provide Car Year, Car Make, Car Model, Car Last 8 digits of (VIN)OR (ESN) ENGINE SERIAL NUMBER.
REGFIL FF63009 Fleetguard Fuel Filter Water Separator Replaces 5303743 FF63008 FH22168 5304214 5289121 FF63054NN 6.7 Cummins B/L Diesel Engine Filtration Element 10 Micron Highway-Bus/Truck (6 PCS)…
REGFIL Replacement Part Number : FF63008,FH22168 5304214 5289121,Fleetguard FF63009 Fleetguard 5303743 Fuel Filter ,FF63054NN Fuel Filter. || Fit For : Fleetguard FF63009 Cummins 5303743 Fuel Filter FF63009 Cummins Fuel Filter Fleetguard Cummins B- and L- Series Diesel Engines Filtration . Easy installation and perfect fit. || Perfect Design : Delivers Maximum Engine Life With Best-In-Class Protection and Longer Filter Life. || Benefit : Filtration media reduces the number of harmful particles reaching the engine's fuel injectors.Reduce equipment downtime and lower Total Cost of Ownership (TCO). || After-Sales Service : Establish strict quality control standards,buy with confidence! Note:Please fill the filter with fuel before installation.Replace every 15,000 miles/500 hours(On/Off-Highway).
REGFIL Replacement Part Number : FF63008,FH22168 5304214 5289121,Fleetguard FF63009 Fleetguard 5303743 Fuel Filter ,FF63054NN Fuel Filter. || Fit For : Fleetguard FF63009 Cummins 5303743 Fuel Filter FF63009 Cummins Fuel Filter Fleetguard Cummins B- and L- Series Diesel Engines Filtration . Easy installation and perfect fit. || Perfect Design : Delivers Maximum Engine Life With Best-In-Class Protection and Longer Filter Life. || Benefit : Filtration media reduces the number of harmful particles reaching the engine's fuel injectors.Reduce equipment downtime and lower Total Cost of Ownership (TCO). || After-Sales Service : Establish strict quality control standards,buy with confidence! Note:Please fill the filter with fuel before installation.Replace every 15,000 miles/500 hours(On/Off-Highway).
FOCUSFILTER FF63009 FF63054NN OEM Grade Fuel Filter, fits Cummins B & L Series Diesel Engines, Replaces 5303743, FF63008, FH22168, BF63000, 5289121, 5304214, P553009, WF10564, 63009 (Pack of 6)
FOCUSFILTER [Vehicle Fitment-1]: BLUE BIRD-ALL AMERICAN FE（08-20); Ford F650, F750 (w/Cummins ISB6.7L eng.)(14-15); Freightliner-(Chassis) S2C chassis (w/Cummins ISB6.7 eng.)(13-19); IC Bus-HC Series Bus (w/Cummins ISB 5.9L Eng.)(16-19) || [Vehicle Fitment-2]: INTERNATIONAL 4400 Durastar (w/Cummins ISL8.9 eng.)(17-19); T300 (w/Paccar PX9 eng.)(16-19); DOOSAN G70-Power Generation || [OE/OEM Part Number]: 5303743, 5289121, 5304214, 46587383, 46645085, 2391354 || [Reference Number]: FF63054NN, BF63000 || [Note]: If you're not sure about the part number you need. To better assist you in finding the correct part, please provide Car Year, Car Make, Car Model, Car Last 8 digits of (VIN)OR (ESN) ENGINE SERIAL NUMBER.
FOCUSFILTER [Vehicle Fitment-1]: BLUE BIRD-ALL AMERICAN FE（08-20); Ford F650, F750 (w/Cummins ISB6.7L eng.)(14-15); Freightliner-(Chassis) S2C chassis (w/Cummins ISB6.7 eng.)(13-19); IC Bus-HC Series Bus (w/Cummins ISB 5.9L Eng.)(16-19) || [Vehicle Fitment-2]: INTERNATIONAL 4400 Durastar (w/Cummins ISL8.9 eng.)(17-19); T300 (w/Paccar PX9 eng.)(16-19); DOOSAN G70-Power Generation || [OE/OEM Part Number]: 5303743, 5289121, 5304214, 46587383, 46645085, 2391354 || [Reference Number]: FF63054NN, BF63000 || [Note]: If you're not sure about the part number you need. To better assist you in finding the correct part, please provide Car Year, Car Make, Car Model, Car Last 8 digits of (VIN)OR (ESN) ENGINE SERIAL NUMBER.
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6640 Sealant 1
B - Guide Studs
M8 by 80 mm 2
C 319-6486 Alignment Tool 1
- Bolts
M10 by 50 mm 3
D 1U-6396 O-Ring Assembly Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the wiring harness assembly is correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness and the convoluting.
Ensure that the front housing is clean and free from damage. If necessary, replace the front housing.If necessary, install blanking plugs to a new front housing. Use Tooling (A) in order to seal all D-plugs.
Clean all the gasket surfaces of the cylinder block.
Illustration 1 g02490296
Illustration 2 g02490297
Inspect dowel (16) and dowel (17) for damage. If necessary, replace the dowels in cylinder block (15) .
Install thrust washer (14) into the recess in cylinder block (15) . Refer to Disassembly and Assembly, "Camshaft - Install" for more information.
Install Tooling (B) to cylinder block (15) . Refer to Illustration 2.
Align a new gasket (13) with Tooling (B) . Install the gasket to cylinder block (15) .Note: Ensure that two circular Tabs (X) on the gasket are engaged in two Holes (Y) in cylinder block (15) . Ensure that dowel (17) in cylinder block (15) is engaged on the gasket.
Install Tooling (C) to cylinder block (15) .
Install the front housing over Tooling (B) and Tooling (C) onto cylinder block (15) .
Illustration 3 g02490298
(10) M8 by 20 mm (11) M8 by 35 mm (12) M8 by 25 mm
Illustration 4 g01998054
Install bolts (12) to front housing (7) finger tight.
Remove Tooling (B) .
Loosely install bolts (10) and bolts (11) . Refer to Illustration 3 for the correct position of the bolts.
Tighten bolts (10) , bolts (11) and bolts (12) in the sequence that is shown in Illustration 4 to a torque of 28 N m (248 lb in).
Remove Tooling (C) from the cylinder block.
Illustration 5 g02488340
Install a new O-ring seal (8) and a new O-ring seal (9) to bypass tube (5) . Use Tooling (D) in order to lubricate the O-ring seals.
Install bypass tube (5) to the cylinder head. Install bolts (6) . Tighten the bolts to a torque of 9 N m (80 lb in).
Connect harness assembly (2) to coolant temperature sensor (3) .
Slide locking tab (1) (not shown) into the locked position.
Position harness assembly (2) onto bypass tube (5) . Install a new cable strap (4) .Note: Ensure that the cable strap meets Original Equipment Manufactures (OEM) specification.End By:
Install the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Install" for the correct procedure.
Install the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Install" for the correct procedure.
If the engine has an accessory drive, install the accessory drive. Refer to Disassembly and Assembly,
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6640 Sealant 1
B - Guide Studs
M8 by 80 mm 2
C 319-6486 Alignment Tool 1
- Bolts
M10 by 50 mm 3
D 1U-6396 O-Ring Assembly Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the wiring harness assembly is correctly routed and the cable straps are not over tightened. Over tightening of the cable straps will damage the wiring harness and the convoluting.
Ensure that the front housing is clean and free from damage. If necessary, replace the front housing.If necessary, install blanking plugs to a new front housing. Use Tooling (A) in order to seal all D-plugs.
Clean all the gasket surfaces of the cylinder block.
Illustration 1 g02490296
Illustration 2 g02490297
Inspect dowel (16) and dowel (17) for damage. If necessary, replace the dowels in cylinder block (15) .
Install thrust washer (14) into the recess in cylinder block (15) . Refer to Disassembly and Assembly, "Camshaft - Install" for more information.
Install Tooling (B) to cylinder block (15) . Refer to Illustration 2.
Align a new gasket (13) with Tooling (B) . Install the gasket to cylinder block (15) .Note: Ensure that two circular Tabs (X) on the gasket are engaged in two Holes (Y) in cylinder block (15) . Ensure that dowel (17) in cylinder block (15) is engaged on the gasket.
Install Tooling (C) to cylinder block (15) .
Install the front housing over Tooling (B) and Tooling (C) onto cylinder block (15) .
Illustration 3 g02490298
(10) M8 by 20 mm (11) M8 by 35 mm (12) M8 by 25 mm
Illustration 4 g01998054
Install bolts (12) to front housing (7) finger tight.
Remove Tooling (B) .
Loosely install bolts (10) and bolts (11) . Refer to Illustration 3 for the correct position of the bolts.
Tighten bolts (10) , bolts (11) and bolts (12) in the sequence that is shown in Illustration 4 to a torque of 28 N m (248 lb in).
Remove Tooling (C) from the cylinder block.
Illustration 5 g02488340
Install a new O-ring seal (8) and a new O-ring seal (9) to bypass tube (5) . Use Tooling (D) in order to lubricate the O-ring seals.
Install bypass tube (5) to the cylinder head. Install bolts (6) . Tighten the bolts to a torque of 9 N m (80 lb in).
Connect harness assembly (2) to coolant temperature sensor (3) .
Slide locking tab (1) (not shown) into the locked position.
Position harness assembly (2) onto bypass tube (5) . Install a new cable strap (4) .Note: Ensure that the cable strap meets Original Equipment Manufactures (OEM) specification.End By:
Install the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Install" for the correct procedure.
Install the timing gears. Refer to Disassembly and Assembly, "Gear Group (Front) - Install" for the correct procedure.
If the engine has an accessory drive, install the accessory drive. Refer to Disassembly and Assembly,
Parts guide Caterpillar catalog:
5304177
GUIDE
Caterpillar
Caterpillar
5303847
GUIDE
Caterpillar
Caterpillar
5300688
GUIDE AS
Caterpillar
Caterpillar
5300341
GUIDE-WEAR
Caterpillar
Caterpillar
5299850
GUIDE
Caterpillar
Caterpillar
5299667
GUIDE-BODY
Caterpillar
Caterpillar
5306225
GUIDE-HOSE
Caterpillar
Caterpillar
5306168
GUIDE-CYLINDER
Caterpillar
Caterpillar
5304859
GUIDE
Caterpillar
Caterpillar
5304466
GUIDE
Caterpillar
Caterpillar
5304379
GUIDE
Caterpillar
Caterpillar
5304349
GUIDE
Caterpillar
Caterpillar