H.EXCHANGER A. 2L5149 - Caterpillar

Engine High Idle (39)
Engine High Idle - Press the engine high idle button to set the engine high idle. Press the button again to return to low idle.Upper Conveyor (Second Stage) Unfold (40)
Upper Conveyor (Second Stage) Unfold - Press and hold the button to extend the upper conveyor. The indicator next to the button will illuminate when the button is held.Vacuum Dust Control System On/Off (41) (If Equipped)
Vacuum Dust Control System On/Off - Press the button to turn ON the vacuum dust control system. When the vacuum dust control system is ON, the indicator next to the button will be illuminated. Press the button again to turn OFF the vacuum dust control system.Left Grade Control Ski Raise/Lower (If Equipped) (42)
Left Grade Control Ski Raise/Lower - Press the button to lower the ski. When the ski is lowered, the indicator next to the button will be illuminated. Press the button again to raise the ski. When the ski is raised, the indicator next to the button will be off.Water Spray System Flow Rate Increase (43)
Water Spray System Flow Rate Increase - Press the button to increase the flow rate of the water spray system. Each time the button is pressed the flow rate will increase, until the top light is illuminated next to the button.Water Spray System Flow Rate Decrease (44)
Water Spray System Flow Rate Decrease - Press the button to decrease the flow rate of the water spray system. Each time the button is pressed the flow rate will decrease, until the bottom light is illuminated next to the button.Right Grade Control Ski Raise/Lower (If Equipped) (45)
Right Grade Control Ski Raise/Lower - Press the button to lower the ski. When the ski is lowered, the indicator next to the button will be illuminated. Press the button again to raise the ski. When the ski is raised, the indicator next to the button will be off.Console Adjustment (46)
Console Adjustment - Lift the handle to raise or lower the console.12V Power Receptacle (47)
12V Power Receptacle - This power receptacle can be used to power automotive electrical equipment or accessories. Remove the cap before use.Engine Start Switch (48)
When you turn the switch to the ON position, electrical power is supplied to the systems.
Engine Stop (Shutdown) - Turn the key to this position to disable the delayed engine shutdown (DES). The engine will be shut down immediately.Note: Shutting down the engine using this method is considered a hard shutdown which disables the DES.Note: A warning message and/or Audible alarm will be initiated. A fault code will be logged for improper engine shutdown if exhaust temperature is above limit.Note: Overriding delayed engine shutdown may reduce engine and machine system component life.
OFF - When you insert