HALF BRACKET 0851530 - Caterpillar

Data Card Related Information
The display uses industry standard data cards (CompactFlashTM) in order to store all of the designs and other information required for the AccuGrade system. Illustration 1 shows the physical size of the data card.
Illustration 1 g01239978
Data Card with Card AdapterIn order to transfer the data to and to transfer the data from a data card, the office computer needs an appropriate reader for the data card. The type of reader that is required will depend upon the type of computer that is available and the operating system that the computer is running.Notebook Computers
A printed circuit (PC) card (PCMCIA) slot is available on most notebook computers. Place the data card into a PC card adapter and insert the adapter into the PCMCIA slot.Desktop Computers
Usually, no data card or PC card interface is available on desktop computers. However, there are numerous third-party solutions available.Contact your office computer supplier for data card reader solutions.Microsoft Windows 98, Windows 2000, or Windows XP
If an office computer has Microsoft Windows 98, Microsoft Windows 2000, or Microsoft Windows XP, then the computer will detect a data card (plug and play) when the card is connected to the computer. The computer will assign the data card to the next available drive letter.Some office computers may perform an autodetect routine the first time the data card is inserted.Note: You must "Stop" the data card before removing the data card from the computer. Failure to do so can corrupt the data.Data Card Errors
Data card errors occur if you pull the data card out of the display while the data card is in use. When the amber LED light next to the data card slot is illuminated or flashing, do not remove the data card.
The AccuGrade system checks the integrity of the data card every five seconds. If the system detects an error, the system records the error in the "ProgramLog.txt" file. A screen that explains the problem appears on the display. The data card may need to be reformatted. Alternatively, replace the data card and copy the data card's contents to a new card.