HAND TOOL GP 3P2245 - Caterpillar

Illustration 1 g01387938
Illustration 2 g01522014
Do Not Weld or Drill on Lift Arms (1) . This additional message is located on the left side and the right side of the lift arms.
Illustration 3 g01224851
Transmission Oil Fast Fill (2) . This additional message is located in the articulation area on the right side of the machine.
Illustration 4 g01429856
This additional message identifies the location of the fast fill connector for the transmission oil.Hydraulic Oil Fast Fill (3) . This additional message is located in the articulation area on the right side of the machine.
Illustration 5 g01429855
This additional message identifies the location of the fast fill connector for the hydraulic oil.Alternate Exit (4) . This additional message is located on the rear window and the inner window.
Illustration 6 g01002993
Note: The rear window and the inner window are the alternate exits. Other windows in the operator station may be fitted with this additional message.If the primary exit is blocked, exert outward pressure on the window until the window separates from the operator station frame. Exit the machine through the window.Alternate Exit (5) . This additional message is located on the rear window and the inner window.
Illustration 7 g00915912
Note: The rear window and the inner window are the alternate exits. Other windows in the operator station may be fitted with this additional message.If the primary exit is blocked, exert outward pressure on the window until the window separates from the operator station frame. Exit the machine through the window.Engine Coolant Fast Fill (6) . This additional message is located on the radiator guard on the right side of the machine.
Illustration 8 g01429853
This additional message identifies the location of the fast fill connector for the engine coolant.Extended Life Coolant (ELC) (7) This additional message is located next to the cooling system pressure cap.
Illustration 9 g01425705
The cooling system is filled with Extended Life Coolant (ELC) from the factory.Jacking Locations (8). This additional message is located on both sides of the machine articulating hitch and on both sides of the rear frame.
Illustration 10 g01522063
This is the recommended location for jacking up the machine. For more information on jacking up the machine, refer to Operation and Maintenance Manual, "Jacking Locations".Fire Suppression System (Foam) (If Equipped) (9) (10) . This additional message is located on the foam fire suppression system manual control.
Illustration 11 g01431884
This additional message is located on the right side of the radiator guard and in the operator station.
Illustration 12 g01431893
For more information on the foam fire suppression system, refer to Operation and Maintenance Manual, "Fire Suppression System (Foam)".Fire Suppression System (Dry Powder) (If Equipped) (11) . This additional message is located on the right side of the radiator guard and in the operator station.
Illustration 13 g01431885
For more information on the dry powder fire suppression system, refer to Operation and Maintenance Manual, "Fire Suppression System (Dry Powder)".