HANDHOLD GP 3901847 - Caterpillar

3901847 HANDHOLD GP Caterpillar parts D6T LGP

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3901847
390-1847
3901847

Buy HANDHOLD GP 3901847 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 3901847:

TRACK-TYPE TRACTOR D6T LGP Caterpillar

Number on catalog scheme:

Caterpillar 3901847 Parts scheme HANDHOLD GP

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the exhaust elbow from the turbocharger. Refer to Disassembly and Assembly, "Exhaust Elbow - Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Note: Plug and cap all open ports and tube assemblies.
Illustration 1 g02568360
Typical example
Loosen hose clamps and disconnect the hose assemblies from turbocharger inlet (7) and from turbocharger outlet (6) (not shown).
Remove banjo bolt (5) from tube assembly (8). Remove sealing washers (4) (not shown).
Remove clip (9) from tube assembly (8) and tube assembly (14).
Slide hose clamp (1) along hose assembly (2). Disconnect hose assembly (2) from the wastegate actuator.
Remove bolt (3) and bolt (11) for tube assembly (10).
Slide hose clamp (12) along the hose assembly. Remove tube assembly (10).
Remove bolts (13) tube assembly (14).
Illustration 2 g03735212
Typical example
Remove nuts (18). Remove turbocharger (15) from exhaust manifold (20). Note: Do not use the actuator rod to lift the turbocharger.
Remove gasket (19) (not shown).
Remove gasket (16) (not shown) from tube assembly (14).
If necessary, remove the studs (17) (not shown) from turbocharger (15).
Illustration 3 g02570158
If necessary, follow Step 12.a through Step 12.f in order to remove tube assembly (8) and tube assembly (14).
Remove clip (25) from tube assembly (8) and tube assembly (14).
Remove banjo bolt (23) from tube assembly (8). Remove sealing washers (24) (not shown).
Remove bolts (21) and spacer (22) (not shown).
Remove tube assembly (8).
Remove bolts (26) and remove tube assembly (14).
Remove gasket (27) (not shown).