1961490 HANDLE Caterpillar parts
308C, 314C, 321C, 325C
Rating:
Alternative (cross code) number:
CA1961490
196-1490
1961490
CA1961490
196-1490
1961490
Weight: 1 pounds 0 kg.
EXCAVATOR, MINI HYD EXCAVATOR,
Number on catalog scheme:
87
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 140-7742 Sleeve 1
D 9U-5342 Pin Driver Cap 1
E 4C-9485 Pin Driver Cap 1
F 5P-0960 Grease Cartridge 1
Apply Tooling (F) to the bearings and the seals in the stick and the power link.
Illustration 1 g01215263
Attach a suitable lifting device to right hand idler link (10). The weight of right hand idler link (10) is approximately 32 kg (70 lb). Position right hand idler link (10). Use Tooling (E) in order to install pin assembly (9).
Illustration 2 g01214976
Illustration 3 g00356648
Attach a suitable lifting device to left hand idler link (7). The weight of left hand idler link (7) is approximately 32 kg (70 lb). Push pin assembly (9) through left hand idler link (7). Install bolt (8) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (8). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 4 g01213417
Temporarily install O-ring seals (3) onto the flanges of the bucket at the pin bore for the power link.
Illustration 5 g01214065
Illustration 6 g01215012
Attach Tooling (B) and a suitable lifting device to power link (4). The weight of power link (4) is approximately 129 kg (285 lb). Position power link (4) on the rod end of the bucket cylinder and between the idler links. Apply Tooling (F) to pin assembly (6). Use Two people and Tooling (D) in order to install pin assembly (6). The weight of pin assembly (6) is approximately 27 kg (60 lb).
Install bolt (5) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (5). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 7 g01213334
Apply Tooling (E) to pin assembly (1).
Install Tooling (D) on pin assembly (1). Use a suitable lifting device to position pin assembly (1). The weight of pin assembly (1) is approximately 54 kg (120 lb). Use Tooling (D) to install pin assembly (1).
Illustration 8 g01213478
Install bolt (2) on pin assembly (1).
Table 1
Required Tools
Tool Part Number Part Description Qty
B 140-7742 Sleeve 1
D 9U-5342 Pin Driver Cap 1
E 4C-9485 Pin Driver Cap 1
F 5P-0960 Grease Cartridge 1
Apply Tooling (F) to the bearings and the seals in the stick and the power link.
Illustration 1 g01215263
Attach a suitable lifting device to right hand idler link (10). The weight of right hand idler link (10) is approximately 32 kg (70 lb). Position right hand idler link (10). Use Tooling (E) in order to install pin assembly (9).
Illustration 2 g01214976
Illustration 3 g00356648
Attach a suitable lifting device to left hand idler link (7). The weight of left hand idler link (7) is approximately 32 kg (70 lb). Push pin assembly (9) through left hand idler link (7). Install bolt (8) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (8). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 4 g01213417
Temporarily install O-ring seals (3) onto the flanges of the bucket at the pin bore for the power link.
Illustration 5 g01214065
Illustration 6 g01215012
Attach Tooling (B) and a suitable lifting device to power link (4). The weight of power link (4) is approximately 129 kg (285 lb). Position power link (4) on the rod end of the bucket cylinder and between the idler links. Apply Tooling (F) to pin assembly (6). Use Two people and Tooling (D) in order to install pin assembly (6). The weight of pin assembly (6) is approximately 27 kg (60 lb).
Install bolt (5) and the nut. Tighten the outside nut until the outside nut is 0.5 mm (0.020 inch) beyond the end of bolt (5). Tighten the inside nut against the outside nut to a torque of 325 40 N m (240 30 lb ft).
Illustration 7 g01213334
Apply Tooling (E) to pin assembly (1).
Install Tooling (D) on pin assembly (1). Use a suitable lifting device to position pin assembly (1). The weight of pin assembly (1) is approximately 54 kg (120 lb). Use Tooling (D) to install pin assembly (1).
Illustration 8 g01213478
Install bolt (2) on pin assembly (1).
Caterpillar parts catalog:
Parts handle Caterpillar catalog:
1961439
HANDLE AS
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
1961440
HANDLE AS
308C, 314C, 321C, 325C
308C, 314C, 321C, 325C
1785789
HANDLE AS
314C, 314D CR, 314D LCR, 320C, 320D LRR, 320D RR
314C, 314D CR, 314D LCR, 320C, 320D LRR, 320D RR
1961491
HANDLE
314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
2597322
HANDLE
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
2597324
HANDLE AS
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
2187920
HANDLE AS
314C
314C
2232775
HANDLE AS
321C, 321D LCR, 328D LCR
321C, 321D LCR, 328D LCR
1464936
HANDLE AS
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 330D, 330D FM, 330D L, 330D MH, 336D...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D, 329D L, 329D LN, 330D, 330D FM, 330D L, 330D MH, 336D...
2158842
HANDLE AS
325C
325C
2346356
HANDLE
325C
325C
2504820
HANDLE AS
325C
325C
2105825
HANDLE AS
308C, 314C, 321C, 325C
308C, 314C, 321C, 325C
2034440
HANDLE AS
303, 304, 305
303, 304, 305
2602648
HANDLE AS
303, 303.5D, 304, 304.5, 304D CR, 305
303, 303.5D, 304, 304.5, 304D CR, 305
2221355
HANDLE AS
304, 305
304, 305
1993680
HANDLE AS
312C, 312D, 315C, 315D L, 318C, 319C, 319D, 320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L,...
312C, 312D, 315C, 315D L, 318C, 319C, 319D, 320C, 322C, 323D L, 323D LN, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 329D L, 330C, 330C L, 330D, 330D L, 330D LN, 330D MH, 336D L, 336D LN, 345C, 345C L,...
2597324
HANDLE AS
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
2597322
HANDLE
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
308D, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 328D LCR
1961491
HANDLE
314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
314C, 314D CR, 314D LCR, 321C, 321D LCR, 325C, 328D LCR
1785789
HANDLE AS
314C, 314D CR, 314D LCR, 320C, 320D LRR, 320D RR
314C, 314D CR, 314D LCR, 320C, 320D LRR, 320D RR
1961440
HANDLE AS
308C, 314C, 321C, 325C
308C, 314C, 321C, 325C
1961439
HANDLE AS
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR
308C, 308D, 308E CR, 308E SR, 314C, 314D CR, 314D LCR, 314E CR, 314E LCR, 321C, 321D LCR, 325C, 328D LCR