2238495 HANDLE AS Caterpillar parts
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
Rating:
Alternative (cross code) number:
CA2238495
223-8495
2238495
CA2238495
223-8495
2238495
Weight: 0.20 pounds 0 kg.
COMPACT TRACK LOADER, SKID STEER LOADER,
Compatible equipment models: 2238495:
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 386-6030 Lever Puller Hoist Gp 1 Start By:
Remove the counterweight frame.
Illustration 1 g06152508
Disconnect hose assemblies (1).
Disconnect hose assemblies (2) .
Illustration 2 g06152516
Disconnect hose assemblies (3).
Disconnect harness assembly (4).
Disconnect hose assemblies (5) and (6).
Illustration 3 g06152520
Disconnect hose assemblies (7).
Remove clip (8).
Remove bolts (9) (not shown) and position manifold (10) away from the pipelayer frame.
Remove cable straps (11).
Illustration 4 g06152562
Remove clips (12).
Illustration 5 g06152577
Disconnect hose assemblies (13)
Disconnect hose assemblies (15) from swivel tee (14).
Illustration 6 g06152585
Attach Tooling (A) and a suitable lifting device to boom winch, hook winch, and winch frame (16). The combined weight of boom winch, hook winch, and winch frame (16) is approximately 862 kg (1900 lb).
Remove four bolts (18), the washers, and the retainers.
Remove four pin assemblies (17).
Remove boom winch, hook winch, and winch frame (16).
Illustration 7 g06153778
If necessary, attach Tooling (A) to the pipelayer frame (right side) and the counterweight cylinder to secure the counterweight cylinder to the pipelayer frame (right side).
Disconnect hose assemblies (19).
Illustration 8 g06153795
Illustration 9 g06153801
Reinstall pin assembly (20), the spacers, the washers, and the bolts. Repeat this step to install the other pin assembly (20).
Attach a suitable lifting device to pipelayer frame (right side) (21). The weight of pipelayer frame (right side) (21) is approximately 544 kg (1200 lb).
Remove bolts (22), the washers, and the bar.
Remove pin assembly (23).
Repeat Steps 21 and 22 for the remaining pin assembly (23).
Remove bolts (24) and the washers.
Remove pipelayer frame (right side) (21). Position pipelayer frame (right side) (21) onto suitable cribbing.Installation Procedure
Install pipelayer frame (right side) (21) in the reverse order of removal.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 386-6030 Lever Puller Hoist Gp 1 Start By:
Remove the counterweight frame.
Illustration 1 g06152508
Disconnect hose assemblies (1).
Disconnect hose assemblies (2) .
Illustration 2 g06152516
Disconnect hose assemblies (3).
Disconnect harness assembly (4).
Disconnect hose assemblies (5) and (6).
Illustration 3 g06152520
Disconnect hose assemblies (7).
Remove clip (8).
Remove bolts (9) (not shown) and position manifold (10) away from the pipelayer frame.
Remove cable straps (11).
Illustration 4 g06152562
Remove clips (12).
Illustration 5 g06152577
Disconnect hose assemblies (13)
Disconnect hose assemblies (15) from swivel tee (14).
Illustration 6 g06152585
Attach Tooling (A) and a suitable lifting device to boom winch, hook winch, and winch frame (16). The combined weight of boom winch, hook winch, and winch frame (16) is approximately 862 kg (1900 lb).
Remove four bolts (18), the washers, and the retainers.
Remove four pin assemblies (17).
Remove boom winch, hook winch, and winch frame (16).
Illustration 7 g06153778
If necessary, attach Tooling (A) to the pipelayer frame (right side) and the counterweight cylinder to secure the counterweight cylinder to the pipelayer frame (right side).
Disconnect hose assemblies (19).
Illustration 8 g06153795
Illustration 9 g06153801
Reinstall pin assembly (20), the spacers, the washers, and the bolts. Repeat this step to install the other pin assembly (20).
Attach a suitable lifting device to pipelayer frame (right side) (21). The weight of pipelayer frame (right side) (21) is approximately 544 kg (1200 lb).
Remove bolts (22), the washers, and the bar.
Remove pin assembly (23).
Repeat Steps 21 and 22 for the remaining pin assembly (23).
Remove bolts (24) and the washers.
Remove pipelayer frame (right side) (21). Position pipelayer frame (right side) (21) onto suitable cribbing.Installation Procedure
Install pipelayer frame (right side) (21) in the reverse order of removal.
Cat SIS web machinery list:
Parts handle Caterpillar catalog:
1595799
HANDLE
216, 228, 236, 247, 248, 267, 287
216, 228, 236, 247, 248, 267, 287
1417634
HANDLE AS
216, 228, 236, 247, 248, 267, 287
216, 228, 236, 247, 248, 267, 287
1429372
HANDLE
216, 228, 236, 247, 248, 267, 287
216, 228, 236, 247, 248, 267, 287
2482171
HANDLE AS
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 980H
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 980H
2194379
HANDLE
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
2058107
HANDLE AS
267, 267B
267, 267B
2092616
HANDLE
267, 267B
267, 267B
2233725
HANDLE GP-MODULAR
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 267B
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 267B
2233726
HANDLE GP-MODULAR
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 259B3, 267B, 268B
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 259B3, 267B, 268B
2186377
HANDLE
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 259B3, 267B, 268B
216B, 216B3, 226B, 226B3, 232B, 236B, 236B3, 242B, 242B3, 247B, 247B3, 252B, 252B3, 257B, 257B3, 259B3, 267B, 268B
2843914
HANDLE
216B, 226B, 232B, 236B, 236D, 242B, 242D, 246C, 247B, 252B, 256C, 257B, 257D, 259D, 262C, 262C2, 262D, 267B, 268B, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, ...
216B, 226B, 232B, 236B, 236D, 242B, 242D, 246C, 247B, 252B, 256C, 257B, 257D, 259D, 262C, 262C2, 262D, 267B, 268B, 272C, 272D, 272D XHP, 277C, 277C2, 277D, 279C, 279C2, 279D, 287C, 287C2, 287D, 289C, ...
3265614
HANDLE AS
216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3
216B3, 226B3, 236B3, 242B3, 247B3, 252B3, 257B3, 259B3
2482171
HANDLE AS
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 980H
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287, 980H
1429372
HANDLE
216, 228, 236, 247, 248, 267, 287
216, 228, 236, 247, 248, 267, 287
1417634
HANDLE AS
216, 228, 236, 247, 248, 267, 287
216, 228, 236, 247, 248, 267, 287
1595799
HANDLE
216, 228, 236, 247, 248, 267, 287
216, 228, 236, 247, 248, 267, 287
2213065
HANDLE GP-MODULAR
216, 228, 236, 247, 248, 267, 287, D8T
216, 228, 236, 247, 248, 267, 287, D8T
2582534
HANDLE
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 246C, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 259B3, 262C, 262C2, 267, 267B, 268B, 272C, 277C, 277C2, 279C, 279C...
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 246C, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 259B3, 262C, 262C2, 267, 267B, 268B, 272C, 277C, 277C2, 279C, 279C...
1641250
HANDLE
416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446D, 450E, 450F, 621H, 725C, 730C, 735B, 740B
416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 438D, 442D, 442E, 444E, 446D, 450E, 450F, 621H, 725C, 730C, 735B, 740B
2025979
HANDLE
416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D, 446D
416D, 420D, 424D, 428D, 430D, 432D, 438D, 442D, 446D
1641282
HANDLE
416D, 416E, 420D, 420E
416D, 416E, 420D, 420E
3W9225
HANDLE AS
826G II, 826H, 966G, 966G II, 966H, 972G II, 972H, 980G, 980G II, 980H, 980M, 982M, D4H, TH103, TH210, TH215, TH62, TH63, TH82, TH83
826G II, 826H, 966G, 966G II, 966H, 972G II, 972H, 980G, 980G II, 980H, 980M, 982M, D4H, TH103, TH210, TH215, TH62, TH63, TH82, TH83
2194379
HANDLE
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 242B, 242B3, 247, 247B, 247B3, 248, 252B, 252B3, 257B, 257B3, 259B3, 267, 267B, 268B, 287