HANDLE GP-MODULAR 2713101 - Caterpillar

Position two clamps (24) and (25) to the hose assemblies. Install the bolt, the washers, and the nut that secures two clamps (24) and (25) to the hose assemblies.
Illustration 42 g00593449
Position two clamps (22) and (23) to the hose assemblies. Install the bolt, the washers, and the nut that secures two clamps (22) and (23) to the hose assemblies.
Position clamp (21) to the steering control valve. Install bolt (20), the washers, and the nut that secures clamp (21) to the steering control valve.
Illustration 43 g00593446
The view is along the right side of the output transfer gear case.
Position two clamps (18) and (19) to the hose assemblies. Install the bolt, the washers, and the nut that secures two clamps (18) and (19) to the hose assemblies.
Position two clamps (16) and (17) to the hose assemblies. Install the bolt, the washers, and the nut that secures two clamps (16) and (17) to the hose assemblies.
Illustration 44 g00593444
Attach a suitable lifting sling around two steering pump output screens (13) and mounting bracket (14). Secure the suitable lifting sling to a hoist. The weight of mounting bracket (14) and two steering pump output screens (13) is 66 kg (145 lb).
Position mounting bracket (14) and two steering pump output screens (13) to the left side of the engine end frame.
Install three bolts (15) and the washers that secure mounting bracket (14) to the engine end frame.
Illustration 45 g00593443
Connect hose assembly (12) to the check valve on the steering pump.
Illustration 46 g00593440
Connect hose assembly (11) to the check valve on the steering pump.
Illustration 47 g00593439
The view is under the service brake control on the left side of the engine end frame.
Connect wiring harness (10) to the differential pressure switch at the electrical connection. Connect wiring harness (9) to the differential pressure switch at the electrical connection.
Illustration 48 g00593438
Connect hose assembly (8) to the bottom of the torque converter.
Illustration 49 g00593436
Connect three hose assemblies (5), (6), and (7) to the gear pump for the power train.
Illustration 50 g00593435
The view is near the right side of the diverter valve.
Install clamp (4) to hose assembly (5) that supplies oil to the gear pump for the power train.
Illustration 51 g00593434
Connect hose assembly (3) to the swivel tee on the top of the torque converter.
Illustration 52 g00593431
Connect two hose assemblies (2) and (1) to the torque converter priority valve.End By:
Install the cab. Refer to Disassembly and Assembly, "Cab - Install".
Install the brake control valve for the parking brake. Refer to Disassembly and Assembly, "Brake Control Valve (Parking) - Install".
Install the gear pump for the secondary steering system. Refer to Disassembly and Assembly, "Gear Pump (Secondary Steering) - Install".
Install the service brake control. Refer to Disassembly and Assembly, "Service Brake Control - Install".
Install the rear drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Rear) - Remove and Install".
Install the center drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Center) - Remove and Install".
Install the input drive shaft. Refer to Disassembly and Assembly, "Input