HANDLE-GRAB 3197180 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Loctite 8009 Nickel Anti-seize 1
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03647177
Open door (1).
Illustration 2 g03647482
Remove shield (2).
Illustration 3 g03648220
Disconnect temperature sensor (3) from the combustion head.
Cut all cable straps (4) that secure temperature sensor (3) to the exhaust module.
Illustration 4 g03648238
Disconnect temperature sensor (3) from inlet module (5) in order to remove temperature sensor (3). Installation Procedure
Install temperature sensor (3) in the reverse order of removal.
Apply Tooling (A) to the threads of temperature sensor (3). Tighten temperature sensor (3) to a torque of 45 5 N m (33 4 lb ft).