parts catalog

HANDLE AS- 3728422 - Caterpillar

3728422 HANDLE AS- Caterpillar parts HANDLE
Alternative (cross code) number:
Caterpillar 3728422 HANDLE AS-
Weight: 0.29 pounds 0 kg.

Buy HANDLE AS- 3728422 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Charger - Check
Battery Electrolyte Level - Check
Bearing Temperature - Measure/Record
Cooling System Coolant Level - Check
Electrical Connections - Check
Electrohydraulic System - Inspect
Engine Air Cleaner Service Indicator - Inspect
Engine Air Precleaner - Clean
Engine Oil Level - Check
Fuel System Fuel Filter Differential Pressure - Check
Generator Load - Check
Jacket Water Heater - Check
Power Factor - Check
Space Heater - Check
Standby Generator Set Maintenance Recommendations
Stator Winding Temperature - Measure/Record
Voltage and Frequency - Check
Walk-Around Inspection
Every 6 Months
Cooling System Coolant Sample (Level 1) - Obtain
Every Year
Aftercooler Condensation - Drain
Alternator - Inspect
Bearing (Ball) - Lubricate
Belts - Inspect/Adjust/Replace
Cooling System Coolant Sample (Level 2) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Crankcase Blowby - Measure/Record
Crankcase Pressure - Measure
Crankshaft Vibration Damper - Inspect
Cylinder Pressure - Measure/Record
Electrohydraulic System Oil - Change
Electrohydraulic System Oil Filter - Change
Engine Air Cleaner Element - Replace
Engine Crankcase Breather - Clean
Engine Mounts - Check
Engine Oil - Change
Engine Oil Filter (Auxiliary) - Change
Engine Oil Filter - Change
Engine Oil Sample - Obtain
Engine Performance - Test
Engine Protective Devices - Check
Engine Speed/Timing Sensor - Clean/Inspect
Engine Valve Lash and Bridge - Adjust
Exhaust Bypass - Inspect
Exhaust Piping - Inspect
Fuel Metering Valve Screen - Check
Gas Pressure Regulator Condensation - Drain
Hoses and Clamps - Inspect/Replace
Ignition System Timing - Check/Adjust
Inlet Air System - Inspect
Insulation - Test
Oxygen Sensor - Calibrate
Radiator - Clean
Starting Motor - Inspect
Stator Lead - Check
Valve Stem Projection - Measure/Record
Water Pump - Inspect
Generator Set - Test
Every 3 Years
Cooling System Coolant (NGEC) - Change
Rotating Rectifier - Check
Turbocharger - Inspect

Parts handle Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.