HANDLE AS 4226883 - Caterpillar

START BY:a. remove final drive **To remove final drive, see D8L Power Train, Disassembly And Assembly section.1. Assemble tooling (A) as follows:a. Fasten the 5P7284 Plate to the long support end of the 5P7279 Adjustable Hook with the 2H3745 Bolts.b. Put the 5P8622 Shackle through the hole in the 5P7284 Plate.c. Put the 5P8250 Washer on the 5P8715 Bolt, and install the bolt in the top hole in the short support arm of the 5P7279 Adjustable Hook. 2. Fasten a hoist to tooling (A). The adjustments for the support of the adjustable hook are the same as described in final drive removal.
Be sure that the 5P8250 Washer is hooked behind spacer (1) before removing the spacer.
3. Put tooling (A) in position in axle hole (2) in spacer (1). Hook the 5P8250 Washer behind the spacer.4. Slide spacer (1) out on studs (3), and remove the spacer. The weight of the spacer is 254 kg (560 lb.). 5. Remove O-ring seal (4). The following steps are for installation of the final drive spacer.6. Put O-ring seal (4) in position on the steering clutch and brake.7. Put tooling (A) in position in axle hole (2) in the spacer. Make sure the 5P8250 Washer is hooked behind the spacer.8. Put spacer (1) in position on studs (3) with tooling (A).END BY:a. install final drive **For installation of final drive, see D8L Power Train Disassembly And Assembly section.