HANDLE 4509467 - Caterpillar

Illustration 1 g01122305
Illustration 2 g01122306When the electric starting motor is viewed from the drive end, the motor rotates in the following direction. ... ClockwiseNo load conditions at 25 °C (77 °F) Speed ... 6900 1800 rpmCurrent draw ... 127.5 27.5 ampVoltage ... 11 V (1) Battery terminal nut A maximum of three cable or wire terminals should be between the nuts. Torque ... 30.5 3.5 N m (22 3 lb ft) (2) Ground terminal nut Torque ... 30.5 3.5 N m (22 3 lb ft) (3) Ground terminal nut Torque ... 2.25 0.25 N m (20 2 lb in) (4) Switch terminal nut Torque ... 2.25 0.25 N m (20 2 lb in)The wire terminal that is on the switch terminal must be insulated with heat shrink tubing. Do not use molded terminals. (5) Motor terminal nut Torque ... 30.5 3.5 N m (22 3 lb ft) (6) Motor frame terminal nut Torque ... 8 3 N m (70 27 lb in)Clearance between the pinion and the housing ... 9.1 mm (0.36 inch)Solenoid
Current draw at 10 V and 25 °C (77 °F) Pull-in windings ... 92.5 7.5 AmpHold-in windings ... 23 Amp