HANDLE ASSEM. 6V2714 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1 Start By:
Remove the fuel filter elements. Refer to Disassembly and Assembly, "Fuel Filters - Remove and Install".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g03083188
Disconnect fuel lines (1). Cap the openings or plug the openings immediately.
Illustration 2 g03083742
Attach Tooling (A) and a suitable lifting device to fuel filter housing (3). The weight of the fuel filter housing (3) is approximately 122 kg (269 lb).
Remove six bolts (2) and remove fuel filter housing (3).