6V4027 HANDLE AS Caterpillar parts
G3606, G3608, G3612, G3616
Rating:
Alternative (cross code) number:
CA6V4027
6V-4027
6V4027
CA6V4027
6V-4027
6V4027
Weight: 1 pounds 0 kg.
GAS ENGINE,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$249.00
29 Aug 2021
IN: marine_shop7
Caterpillar CAT 6V-4027 G3606, G3608, G3612, G3616 Handle AS
CATERP ✔ USED - An item in perfect working condition. Instructions are included. || ✔ Price: Buyers are free to make an offer using "contact seller" tab on amazon product page. We will proceed/reply if we agree/do not agree the price. If agreed, we will update the price in our listing and we will reply to the buyer so that the buyer can place the order at agreed price. || ✔ ORIGINAL IMAGES OF THE ACTUAL PRODUCT ARE UPLOADED, Please refer closely. We accept returns only if the item was not as described in the listing. || ✔ Shipping :- CUSTOM DUTY AND CHARGES ARE TO BE PAID BY THE BUYER AT THEIR DESTINATION COUNTRY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BUYING. If your area is not serviceable by our logistic partners, we will refund the money. || ✔ We do our best to present accurate, detailed information about every item we sell. If you have any questions, Please contact us before Buying. If you are unhappy for any reason please contact us before leaving the feedback. Your feedback is important to us.
CATERP ✔ USED - An item in perfect working condition. Instructions are included. || ✔ Price: Buyers are free to make an offer using "contact seller" tab on amazon product page. We will proceed/reply if we agree/do not agree the price. If agreed, we will update the price in our listing and we will reply to the buyer so that the buyer can place the order at agreed price. || ✔ ORIGINAL IMAGES OF THE ACTUAL PRODUCT ARE UPLOADED, Please refer closely. We accept returns only if the item was not as described in the listing. || ✔ Shipping :- CUSTOM DUTY AND CHARGES ARE TO BE PAID BY THE BUYER AT THEIR DESTINATION COUNTRY. PLEASE CHECK WITH YOUR COUNTRY'S CUSTOMS OFFICE TO DETERMINE WHAT THESE ADDITIONAL COSTS WILL BE PRIOR TO BUYING. If your area is not serviceable by our logistic partners, we will refund the money. || ✔ We do our best to present accurate, detailed information about every item we sell. If you have any questions, Please contact us before Buying. If you are unhappy for any reason please contact us before leaving the feedback. Your feedback is important to us.
Number on catalog scheme:
1
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Do not disconnect the air lines until the air pressure in the system is at zero. If hose is disconnected under pressure it can cause personal injury.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove the air pressure from the air tank.
Drain the coolant from the cooling system. Refer to the Operation and Maintenance Manual.
Illustration 1 g01023160
Remove bolt (6). Disconnect fittings (3) and remove tube assembly (5) .
Disconnect hose assembly (2) from the air compressor.
Disconnect hose assembly (1) .
Install Tooling (A) and a suitable lifting device to the air compressor. The weight of the air compressor is approximately 27 kg (60 lb).
Disconnect hose assembly (9) from the air compressor.
Remove bolts (7) .
Position a suitable lifting device. Apply tension to the lifting device and remove bolts (8). Remove air compressor (4) and the gasket from the engine.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B 9S-3263 Thread Lock Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the gasket. Replace the gasket, if necessary.
Illustration 2 g01023160
Install Tooling (A). Use a suitable lifting device. The weight of the air compressor is approximately 27 kg (60 lb).
Position air compressor (4) in the front housing. Ensure that the drive gear engages correctly with the gear in the front housing.
Apply Tooling (B) to the threads of bolts (7). Install bolts (7). Tighten bolts (7) to a torque of 100 20 N m (75 15 lb ft).
Install bolts (8). Tighten bolts (8) to a torque of 55 10 N m (41 7 lb ft). Remove Tooling (A) .
Connect hose assembly (9) to the air compressor.
Install tube assembly (5) and connect fittings (3) .
Install bolt (6) .
Connect hose assembly (1) .
Connect hose assembly (2) .
Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
Do not disconnect the air lines until the air pressure in the system is at zero. If hose is disconnected under pressure it can cause personal injury.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Remove the air pressure from the air tank.
Drain the coolant from the cooling system. Refer to the Operation and Maintenance Manual.
Illustration 1 g01023160
Remove bolt (6). Disconnect fittings (3) and remove tube assembly (5) .
Disconnect hose assembly (2) from the air compressor.
Disconnect hose assembly (1) .
Install Tooling (A) and a suitable lifting device to the air compressor. The weight of the air compressor is approximately 27 kg (60 lb).
Disconnect hose assembly (9) from the air compressor.
Remove bolts (7) .
Position a suitable lifting device. Apply tension to the lifting device and remove bolts (8). Remove air compressor (4) and the gasket from the engine.Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B 9S-3263 Thread Lock Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the condition of the gasket. Replace the gasket, if necessary.
Illustration 2 g01023160
Install Tooling (A). Use a suitable lifting device. The weight of the air compressor is approximately 27 kg (60 lb).
Position air compressor (4) in the front housing. Ensure that the drive gear engages correctly with the gear in the front housing.
Apply Tooling (B) to the threads of bolts (7). Install bolts (7). Tighten bolts (7) to a torque of 100 20 N m (75 15 lb ft).
Install bolts (8). Tighten bolts (8) to a torque of 55 10 N m (41 7 lb ft). Remove Tooling (A) .
Connect hose assembly (9) to the air compressor.
Install tube assembly (5) and connect fittings (3) .
Install bolt (6) .
Connect hose assembly (1) .
Connect hose assembly (2) .
Fill the cooling system with coolant to the correct level. Refer to the Operation and Maintenance Manual.
Caterpillar parts catalog:
Parts handle Caterpillar catalog:
8T2663
HANDLE-EXTENTION
3606, 3608, 3612, 3616, G3606, G3606B, G3608, G3612, G3616
3606, 3608, 3612, 3616, G3606, G3606B, G3608, G3612, G3616
9U6243
HANDLE-EXTENSION
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3608
3606, 3608, 3612, 3616, C280-12, C280-16, C280-6, C280-8, G3608
7C7821
HANDLE AS
3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616
3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616
3606, 3608, 3612, 3616, G3606, G3608, G3612, G3616
G3606, G3606B, G3608, G3612, G3616
G3606, G3606B, G3608, G3612, G3616
1423170
HANDLE AS
CPT372
CPT372
1423169
HANDLE AS
CPT372
CPT372
1423168
HANDLE AS
CPT372
CPT372
2086988
HANDLE
CPT372
CPT372
1989627
HANDLE
CPT372
CPT372
6C8997
HANDLE
307, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 325 L, 325B L, 330B L, 345B L, 350, 375, 375 L, 5080
307, 311B, 312, 312B L, 315, 315B L, 317, 317B LN, 318B, 320 L, 320B, 325 L, 325B L, 330B L, 345B L, 350, 375, 375 L, 5080
7Y2812
HANDLE
1390, 312, 315, 317, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 L, 330B L, 330C L, 345B II, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374F L, 375, 385B, 385C, 385C FS, 385C L, 385C L MH...
1390, 312, 315, 317, 322 FM L, 322 LN, 325, 325 L, 325 LN, 330, 330 L, 330B L, 330C L, 345B II, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374F L, 375, 385B, 385C, 385C FS, 385C L, 385C L MH...
6I6915
HANDLE
307, 307B, 311, 312, 312B, 315, 317, 320 L, 320N, 322, 325, 325 L, 330, 330 FM L, 330 L, 345B L, 375, 375 L
307, 307B, 311, 312, 312B, 315, 317, 320 L, 320N, 322, 325, 325 L, 330, 330 FM L, 330 L, 345B L, 375, 375 L
307, 307C, 308C, 311, 311B, 311C, 312, 312B, 312C L, 313B, 314C, 315, 315B, 315C, 317, 318B, 318C, 320, 320 L, 320B, 320B L, 320B U, 320C, 320D L, 320N, 322, 322 FM L, 325, 325B, 325C, 330, 330 FM L, ...
2M8611
HANDLE
D320A
D320A
3L5756
HANDLE ASSEM.
D353C
D353C