HANDRAIL AS. 1857729 - Caterpillar

Illustration 7 g01311565
The "Service" menu option is accessed from the default screen. Press the up arrow button or the down arrow button until "Service" is highlighted. Then press the "OK" button.The selections that are available in the "Service" menu can be password protected with the "Service Mode" in order to limit access to programmable parameters. The programmed parameters in the password protected menu options are available for viewing only. Cat ET must be used in order to set the password."Diagnostics/Events"
The "Diagnostics/Events" submenu will display a complete list of all active event codes, inactive event codes, and diagnostic codes. Each line on the list will show the following information:
SRC (source)
Code number
OCC (number of occurrences of the event or code)
Active status or inactive status (code)"System Parameters"
The "System Parameters" submenu will display the parameters for the system components that are monitored by the Electronic Control Modules (ECM). Some of the components may use multiple screens in order to display all of the parameters that are monitored. The "System Parameters" submenu will divide all parameters into the following categories:
Monitoring system (parameters for the Messenger monitoring system)
Engine
Transmission (parameters for the transmission and the chassis)
Hoist (transmission/chassis ECM)
Brake
Payload"Calibrations" (If Equipped)
PayloadThe payload system must be recalibrated if a new TPMS software is installed. The payload system must also be recalibrated if the serial number of the machine is reprogrammed."System Tests"
The following selections are available through the "System Tests" submenu:
Transmission stall test
Manual lube mode (if equipped)
Self test (functional test)"System Information"
The "System Information" submenu will display details about the software version and details about the ECM module for the following systems:
Monitoring system
Engine
Chassis
Payload (if equipped)"Tattletale"
The tattletale feature allows the history of the machine to be recorded. The Tattletale submenu allows the viewing of extreme recorded values for each machine parameter that is active. When the "Active" submenu is selected, the following will be displayed:
All the indicators that were activated will light.
All the gauges will be set to the maximum value that was encountered during operation. This will be the minimum value for the fuel gauge.
The maximum ground speed will be displayed on the LCD.For the following selections on the Tattletale submenu, the Messenger screen will display the values that correspond with the indicators and gauges:
Brake oil temperature
Engine coolant temperature
Engine speed
Torque converter temperature
Fuel levelThe operator can step through the extreme recorded value of each parameter. The parameters that are inactive will be set to the minimum value. The operator can only reset the tattletale values when the "Service Mode" has been entered.Service Mode Menu
Illustration 8 g01380506
The "Service Mode" menu option is accessed from the default screen. Press the up arrow button or the down arrow button until "Service Mode" is highlighted. Then press the "OK" button.The "Service Mode" menu is used in order to enter the "Service" menu on the display. The Service Mode protects certain features from access by the operator. Features that need to be protected from the operator can be enabled or disabled with a password.Note: A password may be required or a password may not be required. This