HANDRAIL AS 2500929 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
6 20R0629 CYLINDER PACK AS
6 2481394 KIT-GASKET-SFI
6 3493417 KIT-GASKET(SCH)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 2% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
If documented oil consumption has occurred: (After Failure Only)
1. Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
2. Remove the oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
3. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove".
4. Remove the piston cooling jets. Refer to Disassembly and Assembly, "Piston Cooling Jets - Remove and Install".
5. Remove the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Remove".
6. Remove and replace all six (6) cylinder packs. Refer to Disassembly and Assembly, "Pistons and Connecting Rods - Install".
7. Check the cylinder liner projection. Refer to Testing and Adjusting, "Cylinder Liner Projection - Inspect".
8. Install the cylinder head, engine oil pump and oil pan with new gaskets as required.
Refer to Service Magazine, "A New Piston Is Used in Certain Machines Equipped with C18 Engines".
Note: The new pistons must be changed as an entire set. The weights between the new and existing pistons do not match. This change is effective for machines built with engine serial numbers TXH1372-UP and RHX10891-UP.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-4000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
4001-8000 hrs,
25-48 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 72.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.