HANDRAIL GP 3015804 - Caterpillar

Illustration 1 g00761111
(1) 168-0016 Bearing for the cap assembly Outside diameter ... 75.085 .01 mm (2.9561 0.0004 inch) Inside diameter ... 60.170 .02 mm (2.3689 0.0008 inch) (2) 168-0017 Bearing for the rod assembly Outside diameter ... 95.102 .011 mm (3.7442 0.0004 inch) Inside diameter ... 80.250 .02 mm (3.1594 0.0008 inch) (3) Distance from the edge of the seal to the edge of the eye ... .5 .5 mm (0.0197 0.0197 inch) (4) Torque the locknut with lubricant on threads. ... 3600 180 N m (2660 135 lb ft) (5) Before installation of the seal assembly, lubricate the inside diameter and outside diameter with clean grease. (6) Diameter of the rod ... 74.93 0.03 mm (2.95 0.001 inch) (7) Head Torque for the head prior to drilling operation ... 850 90 N m (7523 797 lb in) Diameter of the head ... 75.53 0.03 mm (3.0 0.001 inch) (8) Install the seal ring with the slit toward the piston. (9) Lightly Lubricate the sealing lip with the lubricant that is being sealed. (10) Apply 7M-7456 Bearing Mount Compound to the groove of the wiper seal prior to assembly. (11) Diameter of the drilled hole ... 4.5 mm (0.1772 inch) (12) Apply sealant 8T-9016 Gasket Sealant to the hole before assembly. (13) Depth of drilled hole ... 28 .5 mm (1.1024 0.0197 inch) (14) Distance from edge to center of drilled hole ... 15 mm (0.5906 inch) (15) Diameter of the cylinder ... 110 0.1 mm (4.331 0.004 inch)