3910639 HANDRAIL AS Caterpillar parts
789D, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ
Rating:
Alternative (cross code) number:
CA3910639
391-0639
3910639
CA3910639
391-0639
3910639
Weight: 10 pounds 4 kg.
TRUCK,
Number on catalog scheme:
3
For full view, you need register
Information:
Parking Brake
Do not engage the parking brake while the machine is moving unless an emergency exists. The use of the parking brake as a service brake in regular operation causes severe damage to the parking brake system.
Parking Brake - This lever engages the parking brake and locks the transmission lever in NEUTRAL. The machine should not move when engaged. Do not use for stopping the machine. Locked - Pull lever (1) up to engage the parking brake. This also locks the transmission and steering lever in NEUTRAL. Unlocked - Push lever (2) down to release the parking brake. The machine can now move forward or reverse and turn, if the transmission and steering lever is moved.Brake Pedal
Brake Pedal Applied - Push the brake pedal down to apply the service brakes, and slow or stop the machine. Use the service brakes on a downgrade to keep the engine from overspeeding. Brake Pedal Released - Release the brake pedal to allow the machine to move, or increase ground speed.Governor and Decelerator
Governor Lever - Pull the lever back for higher engine speed. Push the lever forward to slow the engine. Push the lever forward to the DETENT position for LOW IDLE. Push the lever all the way forward through the detent to stop the engine. Decelerator Pedal - Push down on the pedal to override the governor control and reduce the engine speed. Use the pedal to reduce engine speed when making directional shifts.Transmission Control
Transmission Direction and Speed Selector - This lever controls transmission NEUTRAL (N) and three speeds each forward (F) and reverse (R). Move the lever to the desired direction and speed to operate the machine.Steering Clutch and Brake
There are two steering clutch and brake control levers. The lever on the left controls the left steering clutch and brake; the lever on the right controls the right steering clutch and brake. Left Steering Clutch and Brake (1) - Pull the lever back. This disengages the steering clutch and steers the machine to the left. The rate of steering is controlled by how far the lever is pulled back.When pressure is felt, the steering brake begins to engage. Pull the lever all the way back to apply the brake for a pivot turn. Right Steering Clutch and Brake (2) - Pull the lever back. This disengages the steering clutch and steers the machine to the right. The rate of steering is controlled by how far the lever is pulled back.When pressure is felt, the steering brake begins engaging. Pull the lever all the way back to apply the brake for a pivot turn.
Do not engage the parking brake while the machine is moving unless an emergency exists. The use of the parking brake as a service brake in regular operation causes severe damage to the parking brake system.
Parking Brake - This lever engages the parking brake and locks the transmission lever in NEUTRAL. The machine should not move when engaged. Do not use for stopping the machine. Locked - Pull lever (1) up to engage the parking brake. This also locks the transmission and steering lever in NEUTRAL. Unlocked - Push lever (2) down to release the parking brake. The machine can now move forward or reverse and turn, if the transmission and steering lever is moved.Brake Pedal
Brake Pedal Applied - Push the brake pedal down to apply the service brakes, and slow or stop the machine. Use the service brakes on a downgrade to keep the engine from overspeeding. Brake Pedal Released - Release the brake pedal to allow the machine to move, or increase ground speed.Governor and Decelerator
Governor Lever - Pull the lever back for higher engine speed. Push the lever forward to slow the engine. Push the lever forward to the DETENT position for LOW IDLE. Push the lever all the way forward through the detent to stop the engine. Decelerator Pedal - Push down on the pedal to override the governor control and reduce the engine speed. Use the pedal to reduce engine speed when making directional shifts.Transmission Control
Transmission Direction and Speed Selector - This lever controls transmission NEUTRAL (N) and three speeds each forward (F) and reverse (R). Move the lever to the desired direction and speed to operate the machine.Steering Clutch and Brake
There are two steering clutch and brake control levers. The lever on the left controls the left steering clutch and brake; the lever on the right controls the right steering clutch and brake. Left Steering Clutch and Brake (1) - Pull the lever back. This disengages the steering clutch and steers the machine to the left. The rate of steering is controlled by how far the lever is pulled back.When pressure is felt, the steering brake begins to engage. Pull the lever all the way back to apply the brake for a pivot turn. Right Steering Clutch and Brake (2) - Pull the lever back. This disengages the steering clutch and steers the machine to the right. The rate of steering is controlled by how far the lever is pulled back.When pressure is felt, the steering brake begins engaging. Pull the lever all the way back to apply the brake for a pivot turn.
Caterpillar parts catalog:
Parts handrail Caterpillar catalog:
3910624
HANDRAIL AS
789D, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797F
789D, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 797F
3413635
HANDRAIL AS
789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
789D, 793D, 793F, 793F AC, 793F CMD, 793F OEM, 793F-XQ, 795F AC, 795F XQ, 797F
2996195
HANDRAIL AS
793D
793D
2843538
HANDRAIL AS
793D
793D
2442233
HANDRAIL AS
793D
793D
2429815
HANDRAIL AS
793D
793D
3318158
HANDRAIL AS
770, 772
770, 772
2763784
HANDRAIL AS
770, 772
770, 772
2763781
HANDRAIL AS
770, 772
770, 772
3318157
HANDRAIL AS
770, 772
770, 772
2698682
HANDRAIL AS
770, 772
770, 772
2429814
HANDRAIL AS
793D
793D