HANDRAIL GP 4195238 - Caterpillar

One-Way Flow from One Pump
One-way flow from one pump can be achieved by selecting a work tool that requires one-way flow from one pump. The work tool can be selected through the monitor or by the work tool select switch. A typical example is a hammer that receives oil from one pump only.When one pump flow is required to the work tool, the pump supplying the oil can be programmed through the monitor. The following situations are listed to increase controllability of the work tool.
When the work tool with a boom and bucket operation is used most often, the idler pump is recommended as the supply pump.
When the work tool with a stick and swing operation is used most often, the drive pump is recommended as the supply pump.Reference: Refer to Testing and Adjusting, "Work Tool Parameter - Program" for the tool control system to change