HANGER 6D1538 - Caterpillar

Fuses - Fuses protect the electrical system from damage that is caused by overloaded electrical circuits. Replace a fuse if the element separates. If the fuse of a particular electrical system requires frequent replacement, check the electrical circuit. Repair the electrical circuit, if necessary.
Always replace fuses with the same type and capacity fuse that was removed. Otherwise, electrical damage could result.
If it is necessary to replace fuses frequently, an electrical problem may exist.Contact your Cat dealer.
Illustration 1 g02571179Raise battery box cover (A) on the right side of the machine. Open access door (B) to the circuit breakers and the fuses.
Illustration 2 g02570819
Circuit breaker, cover,
Fuses are located behind cover (25).Fuses
Illustration 3 g02571039
Fuses
A film for the fuse panel is on the inside of the battery box cover.
Wipers (1) - 15 AmpAccugrade 1 (2) - 15 AmpSpare fuse (3) - 10 AmpAccugrade 2 (4) - 15 AmpSpare fuse (5) - 10 AmpAuxiliary Power (switched) (6) - 15 AmpFuse for the ripper pin puller, for the seat, and for the winch (7) - 10 AmpFront Floodlights (8) - 15 AmpFuel Tank, Rear ROPS Floodlights (9) - 15 AmpSwitching Type Converter (10) - 10 AmpSpare Fuse (11) - 20 AmpAir Conditioning (ROPS) (12) - 15 AmpForward Horn (13) - 10 AmpIgnition Key (14) - 10 AmpMonitoring System (15) - 10 AmpFront ROPS Flood Lights (16) - 15 AmpProduct Link (17) - 10 AmpConverter (18) - 10 AmpAccugrade ECM (19) - 15 AmpAuxiliary Power (Unswitched) (20) - 15 AmpEngine ECM (21) - 15 Amp24 V to 12 V Converter (22) - 20 AmpSpare fuse (23) - 15 AmpSpare fuse (24) - 15 AmpCircuit Breakers
Circuit Breaker/Reset - Push in the button in order to reset the circuit breaker. If the electrical system is working properly, the button will remain depressed.Note: If the button does not remain depressed, check the appropriate electrical circuit. Repair the electrical circuit, if necessary.
Blower (26) - Circuit Breaker