HARNESS, FUEL FEED 0856962 - Caterpillar

Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
Some 316-9954 Water Separator and Fuel Filter As and 382-0664 Water Separator and Fuel Filter As have reports of leaks at the drain valve. Some drain valves were manufactured with different tolerances therefore making the tightening torque different. The assembly torque specifications have been updated to accommodate the variability of mating surfaces of the O-ring.Solution
Check all drain valves and ensure that the valves are hand tight. If a torque wrench is available, tighten the drain valve to a torque of 2.8 to 3.1 N m (25 to 28 lb in). Do not use any other tools other than a torque wrench to tighten the drain valve. If leaks continue after you have tightened the drain valve, use the replacement parts listed in Table 1.
Illustration 1 g02964896
Table 1
New Part Number    Description    
299-1893     Water Separator and Fuel Filter As    
316-9954     Water Separator and Fuel Filter As    
382-0664     Water Separator and Fuel Filter As