AVSPARE.COM
parts catalog

HARNESS A 0878212 - Caterpillar



0878212 HARNESS A Caterpillar parts HARNESS
Rating:
81
Alternative (cross code) number:
CA0878212
087-8212
0878212
Caterpillar 0878212 HARNESS A

Buy HARNESS A 0878212 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

Removal Procedure
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation purposes. Plug all lines, hoses, and tubes.
Open the left access door and turn the battery disconnect switch to the OFF position.
Illustration 1 g03711840
Open access door (1) .
Illustration 2 g03711918
Disconnect hose assemblies (7), (8), and (9) from gear motor (4) .
Remove the four bolts, the four washers, the two clamps, and hose assembly (5) from gear motor (4) .
Remove the four bolts, the four washers, the two clamps, and hose assembly (6) from gear motor (4) .
Attach a suitable lifting device to gear motor (4). The weight of gear motor (4), the fan shroud, and the fan blade assembly is approximately 35 kg (77 lb).
Remove six bolts (2), the six washers, gear motor (4), the fan shroud, and the fan blade assembly.
Illustration 3 g03711998
Remove nut (12), the washer, fan adapter (11), and fan blade assembly (10) from gear motor (4) .
Illustration 4 g03712019
Remove the two bolts, the two washers, gear motor (4) from fan shroud (13) .Installation Procedure
Install gear motor (4) in the reverse order of removal.


Parts harness Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.