HARNESS AS 1075604 - Caterpillar

Table 1
Required Parts    
New
Part
Number     Description     Former
Part
Number    
375-0496     Monitor Software Gp     375-0485    Software Improvements
The functionality of the menu for service "Define Intervals" has been improved. Recommended intervals have been set as default. Intervals can be changed with the number pad to increase or decrease the service hours.
The keypad volume can be adjusted. The menu name for "Brightness Adjustment" has been changed to "Monitor Adjustment".
The flow parameter for "Port A" of a one-way flow tool can be adjusted in the "Tool Configuration" menu.
The work tool class icons are now correctly shown.
The functionality of the "Tool Information" display for buckets has been disabled.
The "Interval" settings for the auto "Lubrication" has been corrected.
The "Intake Manifold Air Pressure" that is displayed in the "Analog Input Status" screen has been changed from absolute to gauge value.
The delay time for the CAN bus failure appearance has been increased to five seconds in order to avoid this error message appearance during shutting down.
The display for the "Brake Oil Accumulator Switch" has been changed from "High/Normal" to "Low/Normal".
The output status for the "Hydraulic Cab Riser Lower Solenoid" and "Hydraulic Cab Riser Raise Solenoid" has been corrected.
The functionality of the status of the "Boom Angle Limit Switch" has been removed from the "Configurations" screen.Adaptable To: The new 375-0496 Monitor Software Gp is a direct replacement for the former 375-0485 Monitor Software Gp .The procedure is effective with the following machines:
M316D (S/N: D6W582)
M318D (S/N: D8W380)
M318D MH (S/N: D9X333)
M322D (S/N: D2W333)
M322D MH (S/N: D3X229)The procedure is adaptable to the following machines:
M316D (S/N: D6W1-581)
M318D (S/N: D8W1-379)
M318D MH (S/N: D9X1-332)
M322D (S/N: D2W1-332)
M322D MH (S/N: D3X1-228)