HARNESS AS 1114729 - Caterpillar

Boom Lower (6) - Move the joystick to this position in order to lower the boom.
Bucket Dump (7) - Move the joystick to this position in order to dump the bucket or the work tool.
Boom Raise (8) - Move the joystick to this position in order to raise the boom.
Bucket Close (9) - Move the joystick to this position in order to close the bucket or the work tool. HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.Joystick Control Selector (If Equipped)
Illustration 3 g00593314
The joystick control selector is located under the left side of the cab, right behind the cab door.
Illustration 4 g00555084
If the valve is in position (1) the handle will be pointing to the front of the machine. This position places the joystick in control pattern 1. If the valve is in position (2) the handle will be pointing to the right side of the machine. This position places the joysticks in control pattern 2.The machine may be equipped with a joystick control selector. The machine control pattern can be varied by turning the valve underneath the left side of the cab. The machine comes from the factory with the joystick control selector in position (1) which places the joysticks in control pattern 1. The alternate position (2) allows the operator to change the functionality of the joysticks to control pattern 2. Control Pattern 2 (Alternate Position)
Illustration 5 g00526389
Left hand joystick
Boom Lower (1) - Move the joystick to this position in order to lower the boom.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Boom Raise (3) - Move the joystick to this position in order to raise the boom.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left. HOLD (5) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.
Illustration 6 g00526411
Right hand joystick
Stick Out (6) - Move the joystick to this position in order to move the stick outward.
Bucket Dump (7) - Move the joystick to this position in order to dump the bucket or the work tool.
Stick In (8) - Move the joystick to this position in order to move the stick inward.
Bucket Close (9) - Move the joystick to this position in order to close the bucket or the work tool. HOLD (10) - When you release the joystick from any position, the joystick will return to the HOLD position. Movement of the structure will stop.Two functions may be performed at the same time by moving the joysticks diagonally.