HARNESS ASSEMBLY 1116229 - Caterpillar

Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00651987
Install seal (13) and two ring (14) in flange (7) .
Illustration 2 g00651986
Install plate (11) and seal (12) on flange (7) .
Illustration 3 g00651985
Install two gears (10) and eight dowels (9) on plate (8) .
Illustration 4 g00651984
Connect plate (8) to flange (7) .
Illustration 5 g00651983
Install seal (5) and two rings (6) on cover (1) .
Illustration 6 g00651982
Install plate (3) and seal (4) on cover (1) .
Illustration 7 g00651981
Install cover (1). Install four bolts (2) and the washers.End By: Install the auxiliary hydraulic pump. Refer to Disassembly and Assembly, "Auxiliary Hydraulic Pump - Install" for the machine that is being serviced.