HARNESS ASSEMBLY 1137133 - Caterpillar

1137133 HARNESS ASSEMBLY Caterpillar parts 572R, D6R, D7R

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1137133
113-7133
1137133

Weight: 0.85 pounds 0 kg.

Buy HARNESS ASSEMBLY 1137133 Caterpillar genuine, new aftermarket tractor parts with delivery
PIPELAYER, TRACK-TYPE TRACTOR,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Old Timer Generational USA Series 5OTG Bruin Traditional Lockback Pocket Knife with Stainless Steel Drop Point Blade, Bone Handle, and Made in USA for Hunting, Everyday Carry, Camping, and Outdoors

$69.32

05 Apr 2022
0.15[0.07] Pounds
Amazon.com

Old Timer Generational USA Series 5OTG Bruin Traditional Lockback Pocket Knife with Stainless Steel Drop Point Blade, Bone Handle, and Made in USA for Hunting, Everyday Carry, Camping, and Outdoors
Old Timer DIMENSIONS: 6.5 inch (16.5 cm) overall length with a blade length of 2.8 inches (7.1 cm), and a weight of 2.39 ounces || DURABLE: Folding blade is made of reliable 1095 HC stainless steel - Made in the USA || BE PREPARED: Single drop point blade has an easily controlled point and a bigger belly for slicing and other general uses || SECURE: Ergonomic sawcut bone handle is fashioned with nickel silver bolsters and pins giving the knife a classic look || CONVENIENT: Knife features a dependable lockback mechanism and folds to 3.7 inches for an ideal everyday carry size in your hand or pocket || GUARANTEED: This product is covered by Old Timer’s Lifetime Warranty. For questions, please contact Old Timer's customer service

Number on catalog scheme: 32

Caterpillar 1137133 Parts scheme HARNESS ASSEMBLY

For full view, you need register

Compatible equipment models: 1137133:

PIPELAYER 572R

TRACK-TYPE TRACTOR D6R D7R Caterpillar

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5J-0490 Bolt 2
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Hot engine components can cause injury from burns. Before performing maintenance on the engine, allow the engine and the components to cool.
Illustration 1 g01208926
Remove the bolts that attach flange (1) and spacer (2) to the engine oil pump. Remove spacer (2) .
Remove flange (1). Remove the O-ring seals from each side of the flange.
Illustration 2 g01208935
Remove bolts (4) and the washers that connect engine oil pump (5) to tee (3) .
Attach a suitable lifting device to engine oil pump (5). The weight of engine oil pump (5) is approximately 105 kg (231 lb).
Remove bolts (6) that attach the engine oil pump to the front housing.
Illustration 3 g01208974
Install Tooling (A) into engine oil pump (5). Tighten Tooling (A) evenly until the engine oil pump is removed from the front housing.
Remove O-ring seals (7) from the dowels in the front housing. Remove the O-ring seal from the joint that is between the engine oil pump and the tee. Discard the O-ring seals.
Illustration 4 g01208976
Remove O-ring seal (8) from engine oil pump (5). Discard the O-ring seal.
If dowel (9) will be replaced, remove the dowel.