HARNESS AS 1160226 - Caterpillar

Illustration 9 g00284780
Install bolts (21) on each side of the support assembly.
Illustration 10 g00284779
Install five bolts (20) at the base of the support assembly.
Illustration 11 g00284777
Install three ties (19) on the right harness.
Illustration 12 g00284774
Connect electrical connector (18) to the alarm.
Illustration 13 g00284773
Install the bolt and clip (17) that secures the wiring harness on the left side of the air duct.
Illustration 14 g00284772
Install two bolts (16) that secure the air duct to the cab. Repeat this step on the other side of the air duct.
Illustration 15 g00284775
Pull both harnesses through the openings in the air duct.
Illustration 16 g00284771
Position switch box (15). Install two bolts (14) .
Illustration 17 g00284750
Illustration 18 g00284749
Install plate assembly (7). Tilt the plate assembly forward.
Connect two harness connector (13) and electrical connector (11) to plate assembly (7) .
Install the lighter assembly on plate assembly (7). Connect wire (10). Install outer cover (12). Connect wire (9) to the lighter assembly.
Illustration 19 g00284748
Connect seven light bulbs (8) to plate assembly (7) .
Illustration 20 g00284747
Tilt plate assembly (7) into position. Install four screws (6). The torque for screws (6) is 1.7 0.2 N m (15 2 lb in).
Illustration 21 g00284745
Install plate assembly (2). Tilt the plate assembly forward.
Connect harness connector (5) and three connectors (4) .
Illustration 22 g00284744
Connect seven light bulbs (3) to plate assembly (2) .
Illustration 23 g00284743
Tilt plate assembly (2) into position. Install four screws (1). The torque for screws (1) is 1.7 0.2 N m (15 2 lb in).
Put the rubber mat on the cab floor.End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".