HARNESS AS 1175758 - Caterpillar

1175758 HARNESS AS Caterpillar parts 950G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1175758
117-5758
1175758

Weight: 1 pounds 0 kg.

Buy HARNESS AS 1175758 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

21 Jan 2019

Heil Quaker: Heil Quaker

Heil Quaker 1175758 (Product Number)
Brand: Heil Quaker || Product Number: 1175758 || Category: HVAC || Free Shipping on this item!

Number on catalog scheme: 8

Caterpillar 1175758 Parts scheme HARNESS AS

For full view, you need register

Compatible equipment models: 1175758:

WHEEL LOADER 950G Caterpillar

Information:

Illustration 19 g01166821
Illustration 20 g01228867
Typical Example
Place a suitable wedge between Tooling (D) and the frame of the machine in order to align Tooling (D) with bearing (18) . Use Tooling (D) in order to install bearing (18) .
Illustration 21 g01166815
Install O-ring seals (17) .
Illustration 22 g01166807
Install face seals (16) .
Illustration 23 g01166715
Attach a suitable lifting device and Tooling (E) to Tooling (A) and steering cylinder (13) . Position steering cylinder (13) . The weight of steering cylinder (13) is approximately 50 kg (110 lb).
Illustration 24 g01166876
Install pin (15) . Install bolt (14) and the washer. Tighten bolt (14) to a torque of 240 40 N m (177 30 lb ft). Strike the head of pin (15) with a suitable hammer and torque bolt (14) to a torque of 240 40 N m (177 30 lb ft). Continue this procedure until bolt (14) maintains a torque of 240 40 N m (177 30 lb ft). Recheck the torque of bolt (14) after the machine has been operated.
Illustration 25 g01166709
Install O-ring seals (12) .
Illustration 26 g01166707
Install face seals (11) .
Illustration 27 g01166699
Install pin (10) . Install bolt (9) and the washer. Tighten bolt (9) to a torque of 240 40 N m (177 30 lb ft). Strike the head of pin (10) with a suitable hammer and torque bolt (9) to a torque of 240 40 N m (177 30 lb ft). Continue this procedure until bolt (9) maintains a torque of 240 40 N m (177 30 lb ft). Recheck the torque of bolt (9) after the machine has been operated.
Illustration 28 g01166692
Remove Tooling (A) .
Illustration 29 g01166676
Connect hose assemblies (8) . Install bolt (7) . Connect grease hose assembly (6) .
Illustration 30 g01166669
Use two people in order to position support assembly (5) . The weight of support assembly (5) is approximately 29 kg (65 lb). Install bolts (4) .
Illustration 31 g01166664
Position deflector (3) . Install bolts (2) .
Illustration 32 g01166659
Remove the suitable cribbing from front fender (1) .End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".