HARNESS ASSEMBLY-BRAKE MODULE 1177560 - Caterpillar

Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g00659813
Use a strap and a suitable lifting device to support hook winch motor (4) .
The weight of the hook winch motor is approximately 57 kg (125 lb). Install two bolts (5), the two washers, and hook winch motor (4) .
Illustration 2 g00659812
Install combination valve (hook) (2) .
Install four allen head screws (3) and the washers on the combination valve (hook).
Illustration 3 g00659811
Connect hose assembly (1) on combination valve (hook) (2) .End By: Install the winches and the winch frame. Refer to Disassembly and Assembly, "Winch and Winch Frame - Install" for the machine that is being serviced.