HARNESS AS 1182198 - Caterpillar

Remove nut (1). Disconnect hose (2). Remove window wiper (3).Note: Mark the position of window wiper (3) for installation purposes.
Illustration 2 g01359134
Remove cap (4).
Illustration 3 g01359139
Remove cover (5).
Illustration 4 g01415056
Disconnect harness assembly (6).
Illustration 5 g01415061
Remove panel assembly (7).
Illustration 6 g01415064
Disconnect harness assembly (8).
Illustration 7 g01415203
Remove nut (9).
Illustration 8 g01415212
Remove nuts (10) to remove wiper motor (11).
Repeat Steps 1 through 8 for the remaining window wiper and wiper motor assembly.Installation Procedure
Illustration 9 g01415212
Install wiper motor (11). Install nuts (10). Tighten nuts (10) to a torque of 7.5 0.5 N m (66 4 lb in).
Illustration 10 g01415203
Install nut (9). Tighten nut (9) to a torque of 9 1 N m (79.65675 8.85075 lb in).
Illustration 11 g01415064
Connect harness assembly (8).
Illustration 12 g01415061
Install panel assembly (7).
Illustration 13 g01415056
Connect harness assembly (6).
Illustration 14 g01359139
Install cover (5).
Illustration 15 g01359134
Install cap (4).
Illustration 16 g01359119
Install window wiper (3). Connect hose (2). Install nut (1). Tighten nut (1) to a torque of 21 1 N m (186 9 lb in). After approximately 30 minutes, tighten nut (1) again to a torque of 21 1 N m (186 9 lb in).Note: When checking the torque of nut (1) in the field, nut (1) must have a minimum torque of 12 N m (106 lb in).
Repeat Steps 1 through 8 for the remaining window wiper and wiper motor assembly.