HARNESS AS-POWER 1352499 - Caterpillar

Illustration 1 g03749837
Front view
Table 1
Specification for 248-0540 Window Wiper Gp
Item Qty Part Specification Description
1 1 8T-5400 Connector As Torque to 0.35 0.05 N m (3.10 0.44 lb in).
2 2 5C-7261 Nut Use the following tightening procedure during wiper arm installation:
1. Tighten the wiper arm nut to 23 1 N m (204 9 lb in).
2. Wait for half an hour hour minimum.
3. Again, tighten the wiper arm nut to 23 1 N m (204 9 lb in).
3 1 248-2620 Wiper Arm As The arm tension is 6.0 0.5 N (1.3 0.1 lb).
4 2 Nut Torque to 38 2 N m (28 1 lb ft).
5 1 6V-7419 Wiper Blade Torque to 3 N m (27 lb in).
Illustration 2 g03749838
248-2617 Window Wiper Motor Gp
Table 2
Item Qty Part Specification Description
C - - Wiping angle from automatic parking position is 50 2 degrees.