HARNESS AS-CONSOLE 1371721 - Caterpillar

There may be several specific safety messages on an engine. The exact location of the hazards and the description of the hazards are reviewed in this section. Please become familiar with all safety messages.Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the pictures are not visible. When the safety messages are cleaned, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off of the engine.Replace any damaged safety messages or missing safety messages. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Any Caterpillar dealer can provide new safety messages. Safety messages can also be ordered from the Parts Manual for this engine.Do not work on the engine and do not operate the engine unless the instructions and warnings in the Operation and Maintenance Manual are understood. Proper care is your responsibility. Failure to follow the instructions or failure to heed the warnings could result in injury or in death.The safety messages may look like Type 1 or Type 2.
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Type 1
Illustration 1 g01287088Read the Manual Before Operating (1)
Illustration 2 g00306265The safety message for reading the manual before operating the unit is located on the outside of the door of the control panel.
Do not operate or work on this engine or generator set unless you have read and understand the instructions and warnings in the Operation and Maintenance Manuals.Failure to follow the warnings and instructions could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Open Vandal Door (2)
The safety message for keeping the vandal door open during operation is located on the outside of the door of the control panel.
Illustration 3 g00305896
Always operate this unit with the vandal door open. Operating the unit with the vandal door closed restricts access to the emergency stop button and could result in injury or death.
Electrical Shock (3)
The safety message for electrical shock is located on the control panel.
Illustration 4 g00580695Electrical shock can cause