HARNESS AS-CHASSIS 1415445 - Caterpillar

Illustration 1 g06304922
Location of Instruction Dealer Product Link Check Steps for 950 GC S/N:M5K
Illustration 2 g06304924
Location of Instruction Dealer Product Link Check Steps for 950 GC S/N:M5T
The instruction "Dealer Product Link Check Steps" for 950 GC S/N:M5K and 950 GC S/N:M5T are located behind the seat in cab on the machines listed above. Refer to Illustration 1 and Illustration 2.Refer to Section "Installation Procedure" for the procedure to install the fuse in the fuse block.Installation Procedure
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.
PL631 on 950 GC S/N:M5K
Turn OFF the machine.
Illustration 3 g06304925
Location of black bag containing fuse
(1) 113-8490 Fuse
Find the 10 amp fuse (1) covered by a transparent plastic bag in the black bag located behind the seat. Refer to Illustration 3.
Illustration 4 g06304927
Fuse block on the rear left side of seat
Remove the fuse block cover located on the rear left side of the seat. Refer to Illustration 4.
Illustration 5 g06304928
Location F31
Install the 10 amp fuse into location F31 on the fuse block as shown in Illustration 5.
Turn ON the key and run a Product Link dealer installation verification test.
Install the cover after the verification.Note: Refer to REHS9111Special Instruction, "Installation Procedure for the Pro Product LinkTM PL641 and PL631 Systems" if there are any questions on the installation and test.PL631 on 950 GC S/N:M5T
Turn OFF the machine.
Illustration 6 g06304925
Location of black bag containing fuse
(1) 113-8490 Fuse
Find the 10 amp fuse (1) covered by a transparent plastic bag in the black bag located behind the seat. Refer to Illustration 6.
Illustration 7 g06304927
Fuse block on the rear left side of seat
Remove the fuse block cover located on the rear left side of the seat. Refer to Illustration 7.
Illustration 8 g06304929
Location F38
Install the 10 amp fuse into location F38 on the fuse block as shown in Illustration 8.
Turn ON the key and run a Product Link dealer installation verification test.
Install the cover after the verification.Note: Refer to , REHS9111Special Instruction, "Installation Procedure for the Pro Product LinkTM PL641 and PL631 Systems" if there are any questions on the installation and test.