HARNESS AS-QC 1459990 - Caterpillar

Personal injury or death can result from the ripper falling.Block the ripper before changing teeth.
Retainer pin, when struck with force, can fly out and cause injury to nearby people.Make sure the area is clear of people when driving retainer pins.To avoid injury to your eyes, wear protective glasses when striking a retainer pin.
Inspect the ripper tips. Replace the ripper tips if the tips are damaged or the tips are worn excessively.
Block up the ripper to a height that is adequate for the removal of the tips.
Illustration 1 g00110460
Drive out the retainer pin from the retainer side of the ripper tip. Remove the ripper tip and the retainer.
Clean the adapter, the retainer pin, and the retainer. Install the retainer in the groove.
Install the new ripper tip over the retainer.
From the opposite side of the retainer, drive the retainer pin through the ripper tip, through the adapter, and through the retainer.
Repeat Step 2 through Step 5 in order to replace additional ripper tips.
Raise the ripper. Remove the block. Lower the ripper to the ground.