HARNESS AS 1527674 - Caterpillar

Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 152-4251 Cylinder Repair Bench 1
B 1P-2853 Spanner Wrench 1
C 280-2060 Offset Spanner Wrench 1
D 8H-8539 1 5/8" Socket 1
5P-3588 Adapter 1 Start By:
Remove blade cylinder.
Illustration 1 g06295269
Illustration 2 g06295274
Remove seals (1) from barrel end of blade cylinder (2). Remove seals (3) from rod end of blade cylinder (4).
Illustration 3 g06295283
Mount blade cylinder (5) into Tooling (A).
Illustration 4 g06295331
Use Tooling (B) to loosen cylinder nut (6).
Illustration 5 g06295371
Illustration 6 g06295383
Remove cylinder nut (6) from the barrel. Place support under barrel end of cylinder (5).
Illustration 7 g06295398
Back the cylinder bench out to remove rod end (9) from the cylinder barrel. Remove set screw and ball (7) from piston (8).
Illustration 8 g06295422
Use Tooling (D) to remove piston (8).
Illustration 9 g06296653
Remove cylinder nut (6) from rod end (9).
Illustration 10 g06295640
Illustration 11 g06295645
Remove bushing (10). Remove outer seal (11), inner seal (12), and O-ring seal (13).
Illustration 12 g06295654
Remove O-ring seal and backup ring (14). Remove O-ring seal (15).
Illustration 13 g06295667
Remove seal (16) and spacer (17).