HARNESS AS 1531149 - Caterpillar

If the calibration was successful, press the Ok button (11).If the calibration was unsuccessful and was aborted by either the calibration tool or the monitor (operator), press the kK button (11).
Illustration 51 g06319034
(11) OK button
(14) Dialog box
(15) Cancel button
If the Abort button (12) has been pressed, a dialog box (14) will appear asking you if you want to continue aborting the calibration. If so, press the OK button (11). If not, press the Cancel button (15).Service > ECM Summary
Illustration 52 g06319475
(1) ECM Summary menu button
(2) Service button
(3) Non-Interactive Scroll Bar with Menu Sliding Indicator
(4) Up arrow
(5) Down arrow (not active)
(6) Back button
(7) Home button
(8) Current Setting Status (Enabled Status shown)
Press the ECM Summary menu button (1). The ECM Summary menu page will appear.ECM Summary Information is available for the following items:
Machine
Engine
Transmission
Steering
Graphical Display
Telematics
Illustration 53 g06319498
ECM Summary menu button group
(2) Service button
(3) Non-Interactive Scroll Bar with Menu Sliding Indicator
(4) Up arrow
(5) Down arrow (not active)
(6) Back button
(7) Home button
(9) ECM Summary menu button
Press the intended menu button in the ECM Summary menu group .
Press the Down Arrow button (5) to continue to scroll down the page. The Up Arrow button (4) will appear.
Press the UP Arrow button to scroll up the page. The menu sliding indicator of the Scroll Bar (3) will move along with the page.
Press the Back button (6) to return to the previous page.
Illustration 54 g06320897
ECM Summary page
(1) Machine Menu button
(2) Parameters page navigation
(3) Scroll Bar / Menu slider
(4) Up Arrow (Not active)
(5) Down Arrow
(6) Back button
(7) Home button
Press the Machine Menu button (1). The machine information page will appear.
Illustration 55 g06320873
Machine information page
(6) Back button
(7) Home button
Press the Back button (6) to return to the previous menu.Note: The procedure for accessing the Machine ECM information page is similar to those for accessing the other information pages in the ECM Summary menu group.
Illustration 56 g06321228
Service page (Service button)
(1) Service Mode Menu button
(2) Service page navigation
(3) Scroll Bar / Menu slider(Not active)
(4) Up Arrow (Not active)
(5) Down Arrow
(6) Back button
(7) Home button
(8) Current setting (Disabled)When the Service Mode is Disabled, the Configurations menu button and the Calibrations menu button are not visible. Neither is the Menu Sliding Indicator. The Service Mode must be Enabled for the Configurations menu button and the Calibrations menu button are visible. To enable the service mode, a passcode must be entered into the Service Mode Numerical Keypad.
Press the Service Mode menu button (1). The Service Mode Numerical Keypad page will appear.
Illustration 57 g06321271
(2) Service page navigation
(6) Back button
(7) Home button
(9) Keypad back button
(10) OK button
Enter the passcode into the Service Mode Numerical Keypad. If needed, press the Keypad Back button (9) to backspace over a number.
Press the Ok button (10) to enter the passcode.Note: The default passcode is "1234".
Illustration 58 g06321287
Service page (Service button)
(1) Service Mode Menu button
(2) Service page navigation
(3) Scroll Bar / Menu slider(Not active)
(4) Up Arrow
(5) Down Arrow(Not active)
(6) Back button
(7) Home button
(8) Current setting (Enabled)
Illustration 58shows the Service page with the service mode now enabled. The current setting (8) is enabled.
Press the Up Arrow button (4) to