HARNESS AS-WIRING 1591177 - Caterpillar

Illustration 3 g01168106
Attach Tooling (A) and a suitable lifting device to air cleaner assembly (3) . The weight of air cleaner assembly (3) is approximately 34 kg (75 lb).
Remove bolts (4) and air cleaner assembly (3) .Note: For an alternate method of the removal of the air cleaner, refer to Steps 6 through Step 9.
Illustration 4 g01297095
Release latches (6) and remove cover assembly (5) .
Illustration 5 g01297121
Remove filter element (7) .
Illustration 6 g01297124
Use Tooling (B) in order to release clamps (8) .
Illustration 7 g01326721
Loosen clamps (9) . Rotate air cleaner housing (10) and carefully remove air cleaner housing (10) from the machine. Make sure that the straps from bracket assembly (11) do not get bent or twisted while air cleaner housing (10) is being removed.Installation Procedure
Table 2
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     1    
B     6V-7935     Screwdriver     1    Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 8 g01326721
Install air cleaner housing (10) and rotate air cleaner housing (10) into position. Make sure that the straps from bracket assembly (11) do not get bent or twisted while air cleaner housing (10) is being installed. Tighten clamps (9) .
Illustration 9 g01297124
Secure clamps (8) .
Illustration 10 g01297121
Install filter elements (7) .
Illustration 11 g01297095
Install cover assembly (5) and secure latches (6) .Note: Refer to Steps 5 through Step 9 as an alternate method of installation of the air cleaner.
Illustration 12 g01168104
Illustration 13 g01168106
Use Tooling (A) and a suitable lifting device to position air cleaner assembly (3) . The weight of air cleaner assembly (3) is approximately 34 kg (75 lb).
Install bolts (4) .
Illustration 14 g01168103
Connect hose (2) .
Install clamp (1) .
Close the engine hood.