1598705 HARNESS AS Caterpillar parts
375
Rating:
Alternative (cross code) number:
CA1598705
159-8705
1598705
CA1598705
159-8705
1598705
EXCAVATOR,
Compatible equipment models: 1598705:
Information:
(1) Bore in bearing of gear (after assembly) ... 63.602 0.038 mm (2.5040 .0015 in) Diameter of bearing surface of the shaft ... 63.500 0.013 mm (2.5000 .0005 in)(2) Install bearing from face of gear to a depth of ... 1.5 0.5 mm (.06 .02 in)(3) Tighten studs to a torque of ... 35 5 N m (26 4 lb ft)(4) Tighten studs to a torque of ... 35 5 N m (26 4 lb ft)(5) Length of gear ... 50.75 0.05 mm (1.996 .002 in) Length of bearing surface of the shaft ... 51.00 0.05 mm (2.008 .002 in)(6) Front (spacer) plate between cylinder block and front housing.(7) Rear face of front housing. 4N2486 Auxiliary Drive Group
(1) Tighten nuts to a torque of ... 55 10 N m (40 7 lb ft)(2) Tighten nut to a torque of ... 120 13 N m (90 10 lb ft) 4W3123 Accessory Drive Group
(1) When sleeve for 1W7935 Hydraulic Pump Drive or the adapter for 1W8585 Auxiliary Drive Group is installed, tighten the bolts to a torque of ... 30 3 N m (22 2 lb ft)(2) Tighten air compressor shaft nut to a torque of ... 150 20 N m (110 15 lb ft) Hit end of shaft with hammer and again tighten nut to a torque of ... 150 20 N m (110 15 lb ft)1N3970 Accessory Drive Group
(1) Tighten the stud to a torque of ... 55 10 N m (41 7 lb ft)(2) When the sleeve for the 1W8583 Hydraulic Pump Drive is installed, tighten the bolts to a torque of ... 30 3 N m (22 2 lb ft)(3) Diameter of gear ... 66.000 0.013 mm (2.5984 .0005 in) Bore in the bearing for the gear ... 66.114 0.038 mm (2.6029 .0015 in)
(1) Tighten nuts to a torque of ... 55 10 N m (40 7 lb ft)(2) Tighten nut to a torque of ... 120 13 N m (90 10 lb ft) 4W3123 Accessory Drive Group
(1) When sleeve for 1W7935 Hydraulic Pump Drive or the adapter for 1W8585 Auxiliary Drive Group is installed, tighten the bolts to a torque of ... 30 3 N m (22 2 lb ft)(2) Tighten air compressor shaft nut to a torque of ... 150 20 N m (110 15 lb ft) Hit end of shaft with hammer and again tighten nut to a torque of ... 150 20 N m (110 15 lb ft)1N3970 Accessory Drive Group
(1) Tighten the stud to a torque of ... 55 10 N m (41 7 lb ft)(2) When the sleeve for the 1W8583 Hydraulic Pump Drive is installed, tighten the bolts to a torque of ... 30 3 N m (22 2 lb ft)(3) Diameter of gear ... 66.000 0.013 mm (2.5984 .0005 in) Bore in the bearing for the gear ... 66.114 0.038 mm (2.6029 .0015 in)
Caterpillar parts catalog:
Parts harness Caterpillar catalog:
7Y5442
HARNESS AS
375, 375 L
375, 375 L
7Y5405
HARNESS AS
375, 375 L, 5080
375, 375 L, 5080
1143096
HARNESS AS
375, 5080
375, 5080
1306573
HARNESS AS
350, 375, 5080
350, 375, 5080
1217164
HARNESS AS
375, 5080
375, 5080
1114794
HARNESS AS
322 LN, 330 L, 350, 375, 375 L, 5080
322 LN, 330 L, 350, 375, 375 L, 5080
1525672
HARNESS AS
375, 5080
375, 5080
1182198
HARNESS AS
375, 5080
375, 5080
1158037
HARNESS AS
350, 375, 5080
350, 375, 5080
1520818
HARNESS AS
320B, 325B L, 330B L, 345B II, 345B L, 365B, 365B II, 375, 385B
320B, 325B L, 330B L, 345B II, 345B L, 365B, 365B II, 375, 385B
1059886
HARNESS AS
375, 375 L
375, 375 L
1060008
HARNESS AS
350, 375, 375 L
350, 375, 375 L
5R6888
HARNESS AS.
130G
130G
5R6887
HARNESS AS.
130G
130G
5R6902
HARNESS AS.
130G
130G
4D3727
HARNESS
12E
12E
1310937
HARNESS AS
350 L, 375
350 L, 375