HARNESS ASSEMBLY-TRANSMISSION 1602185 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     168-0383     Breaker Bar     1    Start By:
Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Accidental machine starting can cause injury or death to personnel working on the machine.To avoid accidental machine starting, turn the battery disconnect switch to the OFF position and remove the key. If the machine is not equipped with a battery disconnect switch, disconnect the battery cables from the battery and tape the battery clamps.Place a do not operate tag at the battery disconnect switch location to inform personnel that the machine is being worked on.
Open the engine hood.
Illustration 1 g00841152
Attach Tooling (A) to the belt tensioner in order to release tension on the belt tightener. Remove drive belt (1) .
Illustration 2 g00841156
Remove bolt (2) and the washer. Remove belt tensioner (3) .Installation Procedure
Illustration 3 g00841156
Install belt tensioner (3). Install bolt (2) and the washer.
Illustration 4 g00841152
Attach Tooling (A) in order to release tension on the belt tightener. Install drive belt (1) .
Close the engine hood.End By: Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".