1636750 HARNESS AS Caterpillar parts
320C, 320C FM, 320C L, 322C, 322C FM, 325C, 325C FM, 325C L, 330C, 330C FM, 330C L, 330C MH
Rating:
Alternative (cross code) number:
CA1636750
163-6750
1636750
CA1636750
163-6750
1636750
Weight: 0.11 pounds 0 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
This part in 2 request:
Show.
This information for suppliers only!
2022-04-14
2020-08-12
Compatible equipment models: 1636750:
Number on catalog scheme:
47
For full view, you need register
Information:
Start By:
Remove the Hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank and Filter - Remove" for the correct procedure.
Illustration 1 g00794619
Remove cover (1) .
Illustration 2 g00794362
Remove fitting (3) and screen assembly (4). Remove hydraulic cap cover (2) .
Illustration 3 g00794313
Remove retaining ring (9), gasket (8), plate (7), ball (6), and filler cap (5) from hydraulic cap cover (2) .
Illustration 4 g00794667
Remove strainer (10). Remove breaker valve (11) (if equipped).
Illustration 5 g00794330
View from inside tank
Remove locknuts (17), washers (16), glass retainer (15), plate (14), grommet (13), and sight glass (12) from the inside of the hydraulic tank.
Illustration 6 g00794676
Remove backup alarm assembly (18) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 7 g00794681
Loosen bolt assembly (19) until the threads are fully disengaged. Remove the filter assembly from the tank.
Illustration 8 g00794723
Remove hydraulic element assembly (20) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 9 g00794728
Use tooling (A) in order to remove retaining ring (21). Remove washer (22), spring (23), plain washer (24), retainer (25), and governor spring (26) from bolt assembly (19). Remove bolt assembly (19) from cover (27) .
Illustration 10 g00794776
Remove temperature switch assembly (28). Remove plug (29) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 11 g00794340
Remove locknuts (30), washers (31), body (32), O-ring seal (33), valve (34), spring (35), and guide (36) from the bottom of the hydraulic tank.
Remove the Hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank and Filter - Remove" for the correct procedure.
Illustration 1 g00794619
Remove cover (1) .
Illustration 2 g00794362
Remove fitting (3) and screen assembly (4). Remove hydraulic cap cover (2) .
Illustration 3 g00794313
Remove retaining ring (9), gasket (8), plate (7), ball (6), and filler cap (5) from hydraulic cap cover (2) .
Illustration 4 g00794667
Remove strainer (10). Remove breaker valve (11) (if equipped).
Illustration 5 g00794330
View from inside tank
Remove locknuts (17), washers (16), glass retainer (15), plate (14), grommet (13), and sight glass (12) from the inside of the hydraulic tank.
Illustration 6 g00794676
Remove backup alarm assembly (18) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 7 g00794681
Loosen bolt assembly (19) until the threads are fully disengaged. Remove the filter assembly from the tank.
Illustration 8 g00794723
Remove hydraulic element assembly (20) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 9 g00794728
Use tooling (A) in order to remove retaining ring (21). Remove washer (22), spring (23), plain washer (24), retainer (25), and governor spring (26) from bolt assembly (19). Remove bolt assembly (19) from cover (27) .
Illustration 10 g00794776
Remove temperature switch assembly (28). Remove plug (29) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 11 g00794340
Remove locknuts (30), washers (31), body (32), O-ring seal (33), valve (34), spring (35), and guide (36) from the bottom of the hydraulic tank.
Caterpillar SIS machinery equipment:
Cat SIS web machinery list:
Parts harness Caterpillar catalog:
120H, 135H, 3126B, 322C, 322C FM, 325C, 325C FM, 561N, 570B, 580B, 938G II, 950G II, 953C, 962G II, 963C, D5N, D6N, IT38G II, IT62G II, M325C MH, SPP101
140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 5...
12H, 140M, 140M 2, 160M, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 340D L, 511, 521, 521B, 522, 522B, 532, 541, 541 ...
12H, 330C, 330C FM, 330C L, 330C MH, 627G, 637G, C-9, D6R II, MTC735, TK711, TK721, TK722, TK732
12H, 330C, 330C FM, 330C L, 330C MH, 627G, 637D, 637G, C-9, D6R II, MTC735, TK711, TK721, TK722, TK732, TK741, TK751, TK752
320C, 322C, 325C, 330C, 330C L
2595232
HARNESS AS
325C
325C
2595233
HARNESS AS
325C
325C
2595284
HARNESS AS
325C
325C
2595179
HARNESS AS
325C
325C
2595178
HARNESS AS
325C
325C
2595181
HARNESS AS
325C
325C
320C
1864591
HARNESS AS
320C
320C
1613088
HARNESS AS
320B U, 320C
320B U, 320C
1673595
HARNESS AS
320B U
320B U
1532635
HARNESS AS
350, 350 L, 365B, 365B L, 375, 385B
350, 350 L, 365B, 365B L, 375, 385B
2041567
HARNESS AS
320C
320C
320C