1706828 HARNESS AS-CONSOLE Caterpillar parts
312C, 312C L, 315C, 318C, 319C, 320C, 320C FM, 320C L, 322C, 322C FM, 325C, 325C FM, 325C L, 330C, 330C FM, 330C L, 330C MH, 345C, 345C MH, 365C, 385C, W345C MH
Rating:
Alternative (cross code) number:
CA1706828
170-6828
1706828
CA1706828
170-6828
1706828
Weight: 0.05 pounds 0 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compatible equipment models: 1706828:
Number on catalog scheme:
10
For full view, you need register
Information:
Illustration 1 g00794340
View from bottom of hydraulic tank
Install guide (36), spring (35), valve (34), O-ring seal (33), body (32), washers (31) and locknuts (30) .
Illustration 2 g00794776
Install plug (29). Tighten plug (29) to a torque of 68 7 N m (50 5 lb ft). Install temperature switch assembly (28) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 3 g00794728
Install bolt assembly (19) through cover (27). Install governor spring (26), retainer (25), plain washer (24), spring (23), and washer (22) on bolt assembly (19). Use tooling (A) in order to install retaining ring (21) into the groove on bolt assembly (19) .
Illustration 4 g00794723
Install the hydraulic element assembly (20) .
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Illustration 5 g00794681
Install the filter assembly into the hydraulic tank. Tighten bolt assembly (19) to a torque of 58.0 1.4 N m (43.0 1.0 lb ft).
Illustration 6 g00794676
Install backup alarm assembly (18) .
Illustration 7 g00794330
View from inside tank
Install sight glass (12) into grommet (13). Place grommet (13), plate (14), and glass retainer (15) in position on the hydraulic tank. Install washers (16) and locknuts (17). Tighten the locknuts to a torque of 30 7 N m (22 5 lb ft).
Illustration 8 g00794667
Install breaker valve (11) (if equipped). Install strainer (13) .
Illustration 9 g00794313
Install filler cap (5), ball (6), plate (7), gasket (8), and retaining ring (9) into hydraulic cap cover (2) .
Illustration 10 g00794362
Install hydraulic cap cover (2). Install screen assembly (4) and fitting (3) .
Illustration 11 g00794619
Install cover (1). Tighten locknuts to a torque of 30 7 N m (22 5 lb ft).Note: Clean the mating surface of the hydraulic tank assembly and the cover before the assembly process. The mating surfaces must be free of dirt and other contaminants.End By: Install the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic tank - Install" for the correct procedure.
Caterpillar SIS machinery equipment:
Cat SIS web machinery list:
Parts harness Caterpillar catalog:
120H, 135H, 3126B, 322C, 322C FM, 325C, 325C FM, 561N, 570B, 580B, 938G II, 950G II, 953C, 962G II, 963C, D5N, D6N, IT38G II, IT62G II, M325C MH, SPP101
140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521, 521B, 522, 5...
12H, 140M, 140M 2, 160M, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 340D L, 511, 521, 521B, 522, 522B, 532, 541, 541 ...
12H, 330C, 330C FM, 330C L, 330C MH, 627G, 637G, C-9, D6R II, MTC735, TK711, TK721, TK722, TK732
12H, 330C, 330C FM, 330C L, 330C MH, 627G, 637D, 637G, C-9, D6R II, MTC735, TK711, TK721, TK722, TK732, TK741, TK751, TK752
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, R1700G, RM-300, TH35-C11I, TH35-C13I, W345C MH
14M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 725, 730, 966H, 972H, 980C, D8N, RM-300, TH35-C11I, TH35-C13I, W345C MH
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 349D, 349D L, 725, 730, 966H, 972H, 980C, C11, C13, CX31-C13I, D8N, W345C MH
311D LRR, 311F LRR, 312D, 312D L, 312D2, 314D CR, 314D LCR, 315D L, 318D2 L, 319D L, 319D LN, 320D, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325D,...
320C, 322C, 325C, 330C, 330C L
320D L, 323D L, 324D, 324D L, 324D LN, 325D, 325D L, 325D MH, 326D L, 328D LCR, 329D, 329D L, 329D LN, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 345C, 345...
330C, 330C L
1636810
HARNESS AS-WIRING
312C L, 315C, 318C, 320C, 320C FM, 320C L, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH
312C L, 315C, 318C, 320C, 320C FM, 320C L, 322C, 322C FM, 325C, 325C FM, 330C, 330C FM, 330C L, 330C MH
312C L, 315C, 318C, 320C, 320C L, 322C, 325C, 330C, 330C L