HARNESS ASSEMBLY 1862518 - Caterpillar

Illustration 56 g00674015
The photograph displays the shift lever and the shift fork.
Remove shift fork (77) from the transmission housing. Remove two thrust pads (79) from the shift fork. The thrust pads are a slip fit.
Loosen socket head bolt (76). Remove pin (75) from shift lever (74) .
Remove retaining ring (80) from pin (75). Remove O-ring seal (78) from pin (75) .
Illustration 57 g00674056
Remove connector (81) and connector (83) .
Remove three tube assemblies (82) .
Illustration 58 g00674080
Remove two bolts (85) and the washers from downshift inhibitor (84) .
Illustration 59 g00674095
Remove two bolts (86) and the washers from downshift inhibitor (84) .
Illustration 60 g00674104
Remove downshift inhibitor (84) from the transmission housing. Remove O-ring seal (87) from the downshift inhibitor.
Illustration 61 g00674144
Remove shaft (88) from the transmission housing.
Illustration 62 g00674163
Remove retaining ring (89) from the transmission housing.
Illustration 63 g00674181
Illustration 64 g00674182
Use a soft faced hammer to remove gear assembly (90) from the transmission housing.
Illustration 65 g00674186
Remove retaining ring (90) from the gear assembly.
Remove washer (92) from the gear assembly.
Remove shifting collar (93) from the gear assembly.
Illustration 66 g00674191
Illustration 67 g00674192
Use Tooling (G) to remove roller bearing (94) from the end of the gear.
Illustration 68 g00674199
Use a press to remove gear (96) from flange (95) .
Illustration 69 g00674205
Remove retaining ring (97) from the flange.
Remove roller bearing (98) from the flange. The roller bearing is a slip fit.
Illustration 70 g00674208
Pry roller bearing (99) from gear (96) .