HARNESS AS 1864536 - Caterpillar

(5) Horn - Press the center of steering wheel in order to sound the horn.
Illustration 3 g01016794
(A) Blank (B) Blank (C) Blank
(6) Headlight Switch - The headlight switch is a three-position switch. Press the top of the switch to the first detent position in order to turn the parking lights and the tail lights ON. Press the top of the switch to the second detent position in order to turn the headlights ON. Press the bottom of the switch in order to turn the headlights, the tail lights, and the parking lights OFF.
(7) Switch for the Automatic Retarder Control System (If Equipped) - For more information, refer to Operation and Maintenance Manual, "Retarding".
(8) Traction Control System Switch (If Equipped) - For more information, refer to Operation and Maintenance Manual, "Traction Control System (TCS) - Test".
(9) Operator Mode Scroll Switch - For more information, refer to Operation and Maintenance Manual, "Operator Mode Scroll Switch".
(10) Engine Start Switch - For more information, refer to Operation and Maintenance Manual, "Engine Starting".
(11) Air Conditioning Switch (If Equipped) - For more information, refer to Operation and Maintenance Manual, "Heating and Air Conditioning Control".
(12) Body Up Sound Reduction Switch (If Equipped) - The switch reduces the high idle speed of the engine to 1800 RPM when the body is raised. This reduces the sound levels from the exhaust for the operator and for the nearby personnel.
(13) Brake Release and Secondary Steering Switch - For more information, refer to the sections that follow.
Operation and Maintenance Manual, "Braking"
Operation and Maintenance Manual, "Towing the Machine"
Operation and Maintenance Manual, "Secondary Steering - Test"
Illustration 4 g00793258
(14) Hazard Flasher Switch
Illustration 5 g00793261
(15) Secondary Brake Control Pedal (16) Service Brake Control Pedal (17) Accelerator Pedal
Illustration 6 g00793267
(18) Parking Brake Switch (19) Transmission Control LeverShift Pattern
Illustration 7 g01012497
Typical Shift Pattern (A) Reverse Position (B) Neutral Position (C) First Gear Forward (D) Second Gear Forward (E) Third Gear Forward (F) Fourth Gear Forward (G) Fifth Gear Forward (H) Sixth Gear Forward (I) Seventh Gear ForwardRefer to Operation and Maintenance Manual, "Direction and Speed Control" for more information about the operation of the transmission control lever.
Illustration 8 g00793268
(20) Retarder Control Lever - For more information, refer to Operation and Maintenance Manual, "Retarding".