HARNESS AS-SENSOR 1922150 - Caterpillar

Optional Plate for the European Union (Earlier Machines)
Illustration 2 g00379876
If the machine is equipped with the optional plate for the European Union, the plate will be located next to the door on the left side of the cab.
If the machine is equipped for the European Union, this plate will be attached. This plate will contain the following information.PIN____________________Model____________________Power (kW)____________________Weight (kg)____________________Note: If the Year Of Manufacture is not located on the optional plate for the European Union, this information will be located on a plate in the cab.Optional Plate for the European Union (Later Machines)
Illustration 3 g01120192This plate is positioned on the bottom left side of the plate for the Product Identification Number (PIN).Note: The CE plate is on machines that are certified to the European Union requirements that were effective at that time.If the machine is equipped with the plate for the European Union, this plate will be attached to the PIN plates. Several pieces of information are stamped onto the CE plate. For quick reference, record this information in the spaces that are provided below.
Engine Power (kW)____________________
Machine Weight (kg)____________________
Compliance Year____________________Serial Number Plate (SN)
Illustration 4 g00434792Service Information Number Plate (SIN)
Illustration 5 g00283188Transmission Serial Number____________________
Illustration 6 g00283191Engine Serial Number____________________The following information is stamped on the component.
Illustration 7 g01193974Torque Converter Serial Number____________________Differential Sequence Number____________________Wheel Station Sequence Number____________________Engine Information Film
Illustration 8 g00668260
This is a typical example of the engine information film that is located on the engine.
Engine Serial Number____________________Engine Arrangement____________________Performance Specification Number____________________Personality Module Part Number____________________Certification
ROPS/FOPS Plate (Earlier Machines)
This certification plate is located outside the cab on the right side of the ROPS.
Illustration 9 g00100417
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification plate. The maximum mass of the machine, which includes the operator and the attachments without a truck body or a payload, should not exceed the mass on the certification plate.ROPS/FOPS Film (Later Machines)
This certification film is located outside the cab on the right side of the ROPS.
Illustration 10 g01125202
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
This machine has been certified to the standards that are listed on the certification film. The maximum mass of the machine, which includes the operator and the attachments without a truck body or a payload, should not exceed the mass on the certification film.