HARNESS AS 1G4634 - Caterpillar

Illustration 1 g03861497
Table 1
Specification for 368-3241 Stick Cylinder Gp
Item Qty Part Specification Description
1 1 147-5838 Bushing Bore before assembly is 90.27 0.02 mm (3.554 0.001 inch).
Installation depth is 9.5 0.3 mm (0.37 0.01 inch).
A 1 368-3265 Stick Cylinder and Seal Gp Bore is 120.06 0.04 mm (4.727 0.002 inch).
B 1 368-6814 Cylinder Rod and Bearing As Diameter is 84.93 0.03 mm (3.344 0.001 inch).
2 8 7Y-5216 Bolt Torque to 530 40 N m (391 30 lb ft).
C 1 374-5131 Head Bore over two lands is 85.63 0.03 mm (3.371 0.001 inch).
3 1 209-0206 Bushing Bore before assembly is 90.27 0.02 mm (3.554 0.001 inch).
Installation depth is 9.5 0.3 mm (0.37 0.01 inch).
4 1 114-0756 Bushing Outside diameter before assembly is 90.133 0.033 mm (3.5485 0.0013 inch).
Thickness is 2.475 0.025 mm (0.0974 0.0010 inch).
5 1 170-9844 Buffer Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
6 1 170-9860 U-Cup Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
7 1 165-9286 Lip Type Seal Lubricate the sealing lip lightly with the lubricant that is being sealed.
8 - - Before assembly, apply white Loctite 536 to the wiper seal groove.
9 1 340-8345 Stop Free linear movement of the stop after assembly is 0.50 0.26 mm (0.020 0.010 inch).
10 2 8T-4241 Retaining Ring Maximum outside diameter of the retaining rings after assembly is 54.2 mm (2.13 inch).
11 1 147-5835 Special Locknut Before assembly, lubricate the face and the threads with 309-6932 Hydraulic Oil.
Torque to 5900 300 N m (4352 221 lb ft).
12 2 158-9063 Ring Lubricate the inside diameter and the outside diameter with clean grease.
13 1 9X-3592 Seal As Lubricate the inside diameter and the outside diameter with clean grease.
14 1 179-9674 Ring Lubricate the inside diameter and the outside diameter with clean grease.
15 1 6I-6786 Seal Ring The slit of the seal ring must turn in the direction of the piston.